This PDF file contains the front matter associated with SPIE Proceedings Volume 10335, including the Title Page, Copyright information, Table of Contents, and Conference Committee listing.

Augmented reality is recently attracting a lot of attention as one of the most spotlighted next-generation technologies. In order to get toward realization of ideal augmented reality, we need to integrate 3D virtual information into real world. This integration should not be noticed by users blurring the boundary between the virtual and real worlds. Thus, ultimate device for augmented reality can reconstruct and superimpose 3D virtual information on the real world so that they are not distinguishable, which is referred to as see-through 3D technology. Here, we introduce our previous researches to combine see-through displays and 3D technologies using emerging optical combiners: holographic optical elements and index matched optical elements. Holographic optical elements are volume gratings that have angular and wavelength selectivity. Index matched optical elements are partially reflective elements using a compensation element for index matching. Using these optical combiners, we could implement see-through 3D displays based on typical methodologies including integral imaging, digital holographic displays, multi-layer displays, and retinal projection. Some of these methods are expected to be optimized and customized for head-mounted or wearable displays. We conclude with demonstration and analysis of fundamental researches for head-mounted see-through 3D displays.

Wearable augmented-reality (AR) has already started to be used productively mainly in manufacturing industry and logistics. Next step will be to move wearable AR from "professionals to citizens” by enabling networked, everywhere augmented-reality (in-/outdoor localisation, scene recognition, cloud access,…) which is non-intrusive, exhibits intuitive user-interaction, anytime safe and secure use, and considers personal privacy protection (user’s and others). Various hardware improvements (e.g., low-power, seamless interactivity, small form factor, ergonomics,…), as well as connectivity and network integration will become vital for consumer adoption. Smart-Glasses (i.e., near-to-eye (NTE) displays) have evolved as major devices for wearable AR, that hold potential to become adopted by consumers soon. Tiny microdisplays are a key component of smart-glasses, e.g., creating images from organic light emitting diodes (OLED), that have become popular in mobile phone displays. All microdisplay technologies on the market comprise an image-creating pixel modulation, but only the emissive ones (for example, OLED and LED) feature the image and light source in a single device, and therefore do not require an external light source. This minimizes system size and power consumption, while providing exceptional contrast and color space. These advantages make OLED microdisplays a perfect fit for near-eye applications. Low-power active-matrix circuitry CMOS backplane architecture, embedded sensors, emission spectra outside the visible and high-resolution sub-pixel micro-patterning address some of the application challenges (e.g., long battery life, sun-light readability, user interaction modes) and enable advanced features for OLED microdisplays in near-to-eye displays, e.g., upcoming connected augmented-reality smart glasses. This report is to analyze the challenges in addressing those features and discuss solutions.

We introduce a time multiplexing strategy to increase the total pixel count of the virtual image seen in a VR headset. This translates into an improvement of the pixel density or the Field of View FOV (or both) A given virtual image is displayed by generating a succession of partial real images, each representing part of the virtual image and together representing the virtual image. Each partial real image uses the full set of physical pixels available in the display. The partial real images are successively formed and combine spatially and temporally to form a virtual image viewable from the eye position. Partial real images are imaged through different optical channels depending of its time slot. Shutters or other schemes are used to avoid that a partial real image be imaged through the wrong optical channels or at the wrong time slot. This time multiplexing strategy needs real images be shown at high frame rates (>120fps). Available display and shutters technologies are discussed. Several optical designs for achieving this time multiplexing scheme in a compact format are shown. This time multiplexing scheme allows increasing the resolution/FOV of the virtual image not only by increasing the physical pixel density but also by decreasing the pixels switching time, a feature that may be simpler to achieve in certain circumstances.

We consider using phase space techniques and methods in analysing optical ray propagation in head mounted display systems. Two examples are considered that illustrate the concepts and methods. Firstly, a shark tooth freeform geometry, and secondly, a waveguide geometry that replicates a pupil in one dimension. Classical optics and imaging in particular provide a natural stage to employ phase space techniques, albeit as a constrained system. We consider how phase space provides a global picture of the physical ray trace data. As such, this gives a complete optical world history of all of the rays propagating through the system. Using this data one can look at, for example, how aberrations arise on a surface by surface basis. These can be extracted numerically from phase space diagrams in the example of a freeform imaging prism. For the waveguide geometry, phase space diagrams provide a way of illustrating how replicated pupils behave and what these imply for design considerations such as tolerances.

Mixed reality head mounted display (HMD) freeform prism systems are widely applied with one surface in total internal reflection (TIR). This however limits the angle of the incident rays and decreases the design freedom. To avoid this, two seldom used design forms of HMD systems are studied and compared to the general applied TIR HMD optics. One of them is a catadioptric HMD system, consisting of one lens and two mirrors, the other is a prism HMD with a different folding geometry. The designs are compared for a field of view of 40°×30° and an increased field of view of 50°×30°. The evaluation indicates good performance; in particular the prism with an alternate folding geometry indicates advantages in both performance and size.

In-line lensless holography is considered with a random phase modulation at the object plane. The forward wavefront propagation is modelled using the Fourier transform with the angular spectrum transfer function. The multiple intensities (holograms) recorded by the sensor are random due to the random phase modulation and noisy with Poissonian noise distribution. It is shown by computational experiments that high-accuracy reconstructions can be achieved with resolution going up to the two thirds of the wavelength. With respect to the sensor pixel size it is a super-resolution with a factor of 32. The algorithm designed for optimal superresolution phase/amplitude reconstruction from Poissonian data is based on the general methodology developed for phase retrieval with a pixel-wise resolution in V. Katkovnik, ”Phase retrieval from noisy data based on sparse approximation of object phase and amplitude”, http://www.cs.tut.fi/~lasip/DDT/index3.html.

Our university carries out various research projects. Among others, the project Schluckspecht is an interdisciplinary work on different ultra-efficient car concepts for international contests. Besides the engineering work, one part of the project deals with real-time data visualization. In order to increase the efficiency of the vehicle, an online monitoring of the runtime parameters is necessary. The driving parameters of the vehicle are transmitted to a processing station via a wireless network connection. We plan to use an augmented reality (AR) application to visualize different data on top of the view of the real car. By utilizing a mobile Android or iOS device a user can interactively view various real-time and statistical data. The car and its components are meant to be augmented by various additional information, whereby that information should appear at the correct position of the components. An engine e.g. could show the current rpm and consumption values. A battery on the other hand could show the current charge level. The goal of this paper is to evaluate different possible approaches, their suitability and to expand our application to other projects at our university.

Imaging waveguides are a key development that are helping to create the Augmented Reality revolution. They have the ability to use a small projector as an input and produce a wide field of view, large eyebox, full colour, see-through image with good contrast and resolution. WaveOptics is at the forefront of this AR technology and has developed and demonstrated an approach which is readily scalable. This paper presents our view of the ideal near-to-eye imaging AR waveguide. This will be a single-layer waveguide which can be manufactured in high volume and low cost, and is suitable for small form factor applications and all-day wear. We discuss the requirements of the waveguide for an excellent user experience. When enhanced (AR) viewing is not required, the waveguide should have at least 90% transmission, no distracting artifacts and should accommodate the user’s ophthalmic prescription. When enhanced viewing is required, additionally, the waveguide requires excellent imaging performance, this includes resolution to the limit of human acuity, wide field of view, full colour, high luminance uniformity and contrast. Imaging waveguides are afocal designs and hence cannot provide ophthalmic correction. If the user requires this correction then they must wear either contact lenses, prescription spectacles or inserts. The ideal imaging waveguide would need to cope with all of these situations so we believe it must be capable of providing an eyebox at an eye relief suitable for spectacle wear which covers a significant range of population inter-pupillary distances. We describe the current status of our technology and review existing imaging waveguide technologies against the ideal component.

The main function of any augmented reality system is to seamlessly merge the real world perception of a viewer with computer generated images and information. Besides real-time head-tracking and room-scanning capabilities the combiner optics, which optically merge the natural with the artificial visual information, represent a key component for those systems. Various types of combiner optics are known to the industry, all with their specific advantages and disadvantages. Beside the well-established solutions based on refractive optics or surface gratings, volume Holographic Optical Elements (vHOEs) are a very attractive alternative in this field. The unique characteristics of these diffractive grating structures - being lightweight, thin, flat and invisible in Off Bragg conditions - make them perfectly suitable for their use in integrated and compact combiners. For any consumer application it is paramount to build unobtrusive and lightweight augmented reality displays, for which those volume holographic combiners are ideally suited. Due to processing challenges of (historic) holographic recording materials mass production of vHOE holographic combiners was not possible. Therefore vHOE based combiners found use in military applications only by now. The new Bayfol® HX instant developing holographic photopolymer film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Bayfol® HX provides full color capability and adjustable diffraction efficiency as well as an unprecedented optical clarity when compared to classical holographic recording materials like silver halide emulsions (AgHX) or dichromated gelatin (DCG). Bayfol® HX film is available in industrial scale and quality. Its properties can be tailored for various diffractive performances and integration methods. Bayfol® HX film is easy to process without any need for chemical or thermal development steps, offering simplified contact-copy mass production schemes.

Polymeric, birefringent reflective polarizers have been used to produce compact, mid-field-of-view eyepieces and wide field-of-view optics for virtual reality (VR) head-mounted displays using the “pancake” lens configuration. Multiple configurations for pancake lens systems are discussed as are their advantages and disadvantages relative to refractive systems. Polarization control is an important consideration and the polarizing effects of different components are discussed. Designs for mid-FOV and wide FOV are presented and additional benefits of using folded optics for virtual reality systems are explored.

In present commercial Virtual Reality (VR) headsets the resolution perceived is still limited, since the VR pixel density (typically 10-15 pixels/deg) is well below what the human eye can resolve (60 pixels/deg). We present here novel advanced optical design approaches that dramatically increase the perceived resolution of the VR keeping the large FoV required in VR applications. This approach can be applied to a vast number of optical architectures, including some advanced configurations, as multichannel designs. All this is done at the optical design stage, and no eye tracker is needed in the headset.

Diffractive optics such as holographic optical elements (HOEs) can provide transparent and narrow band components with arbitrary incident and diffracted angles for near-to-eye commercial electronic products for augmented reality (AR), virtual reality (VR), and smart glass applications. In this paper, we will summarize the operational parameters and general optical geometries relevant for near-to-eye displays, the holographic substrates available for these applications, and their performance characteristics and ease of manufacture. We will compare the holographic substrates available in terms of fabrication, manufacturability, and end-user performance characteristics. Luminit is currently emplacing the manufacturing capacity to serve this market, and this paper will discuss the capabilities and limitations of this unique facility.

We present novel advanced optical designs with a dramatically smaller display to eye distance, excellent image quality and a large field of view (FOV). This enables headsets to be much more compact, typically occupying about a fourth of the volume of a conventional headset with the same FOV. The design strategy of these optics is based on a multichannel approach, which reduces the distance from the eye to the display and the display size itself. Unlike conventional microlens arrays, which are also multichannel devices, our designs use freeform optical surfaces to produce excellent imaging quality in the entire field of view, even when operating at very oblique incidences. We present two families of compact solutions that use different types of lenslets: (1) refractive designs, whose lenslets are composed typically of two refractive surfaces each; and (2) light-folding designs that use prism-like three-surface lenslets, in which rays undergo refraction, reflection, total internal reflection and refraction again. The number of lenslets is not fixed, so different configurations may arise, adaptable for flat or curved displays with different aspect ratios. In the refractive designs the distance between the optics and the display decreases with the number of lenslets, allowing for displaying a light-field when the lenslet becomes significantly small than the eye pupil. On the other hand, the correlation between number of lenslets and the optics to display distance is broken in light-folding designs, since their geometry permits achieving a very short display to eye distance with even a small number of lenslets.

Future commercialization of glasses-free holographic real 3D displays requires not only appropriate image quality but also slim design of backlight unit and whole display device to match market needs. While a lot of research aimed to solve computational issues of forming Computer Generated Holograms for 3D Holographic displays, less focus on development of backlight units suitable for 3D holographic display applications with form-factor of conventional 2D display systems. Thereby, we report coherent backlight unit for 3D holographic display with thickness comparable to commercially available 2D displays (cell phones, tablets, laptops, etc.). Coherent backlight unit forms uniform, high-collimated and effective illumination of spatial light modulator. Realization of such backlight unit is possible due to holographic optical elements, based on volume gratings, constructing coherent collimated beam to illuminate display plane. Design, recording and measurement of 5.5 inch coherent backlight unit based on two holographic optical elements are presented in this paper.

HoloLens by Microsoft Corp. is the world’s first untethered Mixed Reality (MR) Head Mounted Display (HMD) system, released to developers in March 2016 as a Development Kit.

We review in this paper the various display requirements and subsequent optical hardware choices we made for HoloLens. Its main achievements go along performance and comfort for the user: it is the first fully untethered MR headset, with the highest angular resolution and the industry’s largest eyebox. It has the first inside-out global sensor fusion system including precise head tracking and 3D mapping all controlled by a fully custom on-board GPU. Based on such achievements, HoloLens came out as the most advanced MR system today. Additional features may be implemented in next generations MR headsets, leading to the ultimate experience for the user, and securing the upcoming fabulous AR/MR market predicted by most analysts.

Metasurface is a kind of matematerials with only two-dimensional distribution. By carefully arranging the shape and size of each subwavelength antenna, the amplitude, phase, and polarization of reemitted light from the antenna can be artificially control. Eight antennas with same amplitude modulation and different phase modulation are selected to construct different devices. The phase modulations are selected as in the range of 0 to 2π with a step of π/4. Several devices, such as lens, holograms, pure phase elements, are designed, fabricated, and characterized in the terahertz range. Experiment results demonstrate the validity of this new approach.

Numerical simulation of complex optical structures enables their optimization with respect to specific objectives. Often, optimization is done by multiple successive parameter scans, which are time consuming and computationally expensive. We employ here Bayesian optimization with Gaussian processes in order to automatize and speed up the optimization process. As a toy example, we demonstrate optimization of the shape of a free-form reflective meta surface such that it diffracts light into a specific diffraction order. For this example, we compare the performance of six different Bayesian optimization approaches with various acquisition functions and various kernels of the Gaussian process.

We propose a novel 8-channel wavelength multimode interference (MMI) demultiplexer in slot waveguide structures that operated at 1530 nm, 1535 nm, 1540 nm, 1545 nm, 1550 nm, 1555 nm, 1560 nm and 1565 nm wavelengths. Gallium nitride (GaN) surrounded by silicon (Si) was founded as suitable materials for the slot-waveguide structures. The proposed device was designed by seven 1x2 MMI couplers, fourteen S-band and one input taper. Numerical investigations were carried out on the geometrical parameters by using a full vectorial-beam propagation method (FVBPM). Simulation results show that the proposed device can transmit 8-channel that works in the whole C-band (1530- 1565 nm) with low crosstalk ((-19.97)-(-13.77) dB) and bandwidth (1.8-3.6 nm). Thus, the device can be very useful in optical networking systems that work on dense wavelength division multiplexing (DWDM) technology.

Adjustable lens technology has the potential to improve Head Mounted Displays (HMDs) through style and comfort by providing optical prescription correction and focussing mechanisms integrated within the HMD. It can also reduce simulator sickness and user experience of 3D through resolution of Vergence Accommodation Conflict, and age-related user problems (presbyopia). We review the available technology and the design constraints to show how a fluid filled lens may be appropriate for AR and MR, and an Alvarez lens may be appropriate for VR.

A liquid crystal (LC) device is described which is capable of deflecting light in highly controllable ways, leading to multiple applications in imaging displays, spectroscopy, and vision correction.

In this paper, we present the design of a proposed optical rangefinder to determine the distance of a semi-reflective target from the sensor module. The sensor module deploys a simple Tunable Focus Lens (TFL), a Laser Source (LS) with a Gaussian Beam profile and a digital beam profiler/imager to achieve its desired operation. We show that, owing to the nature of existing measurement methodologies, previous attempts to use a simple TFL in prior art to estimate target distance mostly deliver “one-shot” distance measurement estimates instead of obtaining and using a larger dataset which can significantly reduce the effect of some largely incorrect individual data points on the final distance estimate. Using a measurement dataset and calculating averages also helps smooth out measurement errors in individual data points through effectively low-pass filtering unexpectedly odd measurement offsets in individual data points. In this paper, we show that a simple setup deploying an LS, a TFL and a beam profiler or imager is capable of delivering an entire measurement dataset thus effectively mitigating the effects on measurement accuracy which are associated with “one-shot” measurement techniques. The technique we propose allows a Gaussian Beam from an LS to pass through the TFL. Tuning the focal length of the TFL results in altering the spot size of the beam at the beam imager plane. Recording these different spot radii at the plane of the beam profiler for each unique setting of the TFL provides us with a means to use this measurement dataset to obtain a significantly improved estimate of the target distance as opposed to relying on a single measurement. We show that an iterative least-squares curve-fit on the recorded data allows us to estimate distances of remote objects very precisely. We also show that using some basic ray-optics-based approximations, we also obtain an initial seed value for distance estimate and subsequently use this value to obtain a more precise estimate through an iterative residual reduction in the least-squares sense. In our experiments, we use a MEMS-based Digital Micro-mirror Device (DMD) as a beam imager/profiler as it delivers an accurate estimate of a Gaussian Beam profile. The proposed method, its working and the distance estimation methodology are discussed in detail. For a proof-of-concept, we back our claims with initial experimental results.

For many optical systems, mainly in photography, the digital correction of distortion and lateral color aberration is a common step in the image processing pipeline. It is based on images of calibration targets and the determination of coefficients for a correction model. These coefficients are specific for the optical system which forms the aerial image for the sensor. If an exchange of the optical system is necessary, e.g. for offering optics for several applications like macro mode, wide-angle or tele-photo, the entire optical system is typically exchanged and not only parts of it. Using a technique for digital identification of the optical system, e.g. via an electronic interface, the corresponding correction coefficients can be obtained and applied. If the optical system to be exchanged is only a part of the entire optical system, the situation is more difficult. As an example, this is the case in the field of digital microscopy, where objective lenses with different numerical apertures and magnifications are available for the same microscopic body. These objective lenses are no image forming optical systems and need at least a tube lens to produce an image for capturing with a sensor. Both optical systems produce contributions to the resulting overall aberrations, e.g. distortion and lateral color aberration. For a particular pairing, coefficients for a correction model can be calibrated and applied. But in the case of an exchange of the objective, only a part of the optical system changes and a new calibration is needed. We will show how this problem can be solved using a mathematical operation and individual calibration of the distinct parts of the optical system. The advantage is, that the parts of the optical system can be arbitrarily combined and the correction-model coefficients of the combination can be computed from the corresponding coefficients of the individual parts. Hence, there’s no need to calibrate every possible combination or to manage a calibration process at the customer’s location. In addition, the manufacturing and calibration of objectives and tube lenses may take place at different locations. Furthermore, the optical design can benefit from the digital aberration correction although it is made up of interchangeable components.

SeeReal’s concept of real-time holography is based on Sub-Hologram encoding and tracked Viewing Windows. This solution leads to significant reduction of pixel count and computation effort compared to conventional holography concepts. Since the first presentation of the concept, improved full-color holographic displays were built with dedicated components. The hologram is encoded on a spatial light modulator that is a sandwich of a phase-modulating and an amplitude-modulating liquid-crystal display and that modulates amplitude and phase of light. Further components are based on holographic optical elements for light collimation and focusing which are exposed in photopolymer films. Camera photographs show that only the depth region on which the focus of the camera lens is set is in focus while the other depth regions are out of focus. These photographs demonstrate that the 3D scene is reconstructed in depth and that accommodation of the eye lenses is supported. Hence, the display is a solution to overcome the accommodationconvergence conflict that is inherent for stereoscopic 3D displays. The main components, progress and results of the holographic display with 300 mm x 200 mm active area are described. Furthermore, photographs of holographic reconstructed 3D scenes are shown.

In the paper we investigate the possibility of color reconstructions of holograms with a single DMD and incoherent LED source illumination. Holographic display is built with 4F imaging system centering reconstruction volume around the DMD surface. The display design employs complex coding scheme, which allows reconstructing complex wave from a binary hologram. In order to improve the quality of reconstructed holograms time multiplexing method is used. During the optical reconstructions we analyze quality of reconstructed holograms with incoherent RGB light sources as a function of reconstruction distance, present the possibility of 3D hologram reconstruction, and investigate temporal coherence effects in holographic display with the DMD.

The study of the movements of microscopic phase objects, as biological cells, is of high interest in the scientific community. Digital Holographic Microscopy (DHM) is a technique widely used for analysis of phase objects. It can record, in one shot, the sample complex field and then the complex field is refocused in several planes for the 3D sample reconstruction. However, when in the view field there are several cells at different distances from the hologram plane, the correct location of each cell is critical for the analysis of the sample. There are diverse approaches to find the optimal focusing distance of a phase object; however, most of them depend on the input of the cell location in the view field as parameter. This condition restrings their application to cells in movement. We present the analysis of moving phase objects, using an alternative focusing criterion based on the analysis of different sized windows. With this criterion, it is possible to create a depth map of the objects in the sample, and at the same time finds its location in the view field and discriminate them from the background. The depth map is segmented with the clustering K-means method and each cluster is analyzed to determine the optimal object focusing distance. Then an extended focus image of the sample is created and displayed for the user. The method can detect autonomously when a new cell enters in the view field and calculates its focusing distance. The resulting images present all the cells in the sample well focused, and can be used for counting or tracking purposes. We present simulated and experimental results.

In this paper, we use an optical method for the implementation of spatially-tiled digital micro-mirror devices (DMDs) to expand space bandwidth product in general digital holographic display systems. In concatenating more than two spatial light modulators (SLMs) optically, there may exist both phase discontinuity and amplitude mismatching of hologram images emanating from two adjacent SLMs. To observe and estimate those properties in digital holographic display systems, we adopt quantitative phase imaging technique based on transport of intensity equation.

Real time holographic display has been a long-term goal for many display engineers. The promise of true 3D display with accommodation and motion parallax as well as stereopsis is compelling; the daunting challenges involved in realizing such a display include a very high resolution display which scales radically with field-of-view and viewing zone size. Computation, bandwidth, and the requirement for coherent light are also significant challenges. Progress since the 1960s has been slow, but conceptual breakthroughs and the development of enabling technology have finally enabled significant demonstrations of some applications.

The evolution of 3D technologies shows a cyclical learning curve with a series of hypes and dead ends, with mistakes and consequences. 3D images contain significantly more information than the corresponding 2D ones. 3D display systems should be built on more pixels, or higher speed components. For true 3D, this factor is in the order of 100x, which is a real technological challenge. If not fulfilled, the capabilities of 3D systems will be compromised: headgears will be needed, or the viewers should be positioned or tracked, single-user devices, lack of parallax, missing cues, etc. The temptation is always there: why to provide all the information, just what the person absorbs that moment (subjective or objective visualization). Virtual Reality (VR) glasses have been around for more than two decades. With the latest technical improvements, VR became the next hype. 3D immersion was added as a new phenomenon; however, VR represents an isolated experience, and still requires headgears and a controlled environment. Augmented Reality (AR) in this sense is different. Will the VR/AR hype with the headgears be a dead end? While VR headsets may sell better than smart glasses or 3D TV glasses, also consider that using the technology may require a set of behavioral changes that the majority of people do not want to make. Displays and technologies that restrict viewers, or cause any discomfort will not be accepted on the long term. The newer wave of 3D is forecasted to 2018-2020, answering the need for unaided, limitation-free 3D experience. Light Field (LF) systems represent the next-generation in 3D. The HoloVizio system, having a capacity in the order of 100x, offers natural, restrictions-free 3D experience on a full field of view, enabling collaborative use for an unlimited number of viewers, even in a wider, immersive space. As a scalable technology, the display range goes from monitor-style units, through automotive 3D HUDs, screen-less solutions, up to cinema systems, and Holografika is working on interactive large-scale immersive systems and glasses-free 3D LED walls.

Much attention has been paid to the development of three-dimensional volumetric displays in the fields of optics and computer graphics, and it is a dream of we display researchers. However, full-color volumetric displays are challenging because many voxels with different colors have to be formed to render volumetric graphics in real three-dimensional space. Here, we show a new volumetric display in which microbubble voxels are three-dimensionally generated in a liquid by focused femtosecond laser pulses. Use of a high-viscosity liquid, which is the key idea of this system, slows down the movement of the microbubbles, and as a result, volumetric graphics can be displayed. This “volumetric bubble display” has a wide viewing angle and simple refresh and requires no addressing wires because it involves optical access to transparent liquid and achieves full-color graphics composed on light-scattering voxels controlled by illumination light sources. In addition, a bursting of bubble graphics system using an ultrasonic vibrator also has been demonstrated. This technology will open up a wide range of applications in three-dimensional displays, augmented reality and computer graphics.

3-dimensional imaging often requires substantial effort since information along the optical axis is not straight forward gatherable. In many applications it is aimed for depth information along the direction of view. For example fluidic mixing processes and the environmental interaction on a microscopic scale are of particular importance for e.g. pharmaceutical applications and often demand for 3D information. This problem is often solved by stereoscopic approaches, where two cameras are used in order to gather depth information by triangulation technique. Another approach is to scan the object through the focal plane in order to get sharp images of each layer. Since the before mentioned approaches require a lot of video data to be evaluated it would be more convenient to get depth mapping within a single camera recording and without scanning. Here we present a tunable 3D depth-mapping camera technique in combination with dynamic aberration control. By using an incoherent light source, only one camera and a spatial light modulator (LCoS-SLM), it is a simply applicable and highly scalable technique. A double-helix point spread function (DH-PSF) is generated for light emerging from the observed focal plane. Each object appears as a double-image on the camera. Within the orientation of the double-image, depth information along the optical axis is encoded. By using an additional adaptive element (deformable mirror) the technique is combined with wide-field aberration correction. Here we combine a tunable 3D depth camera with dynamic aberration control in one imaging system.

Just as the increasing awareness level of the stereoscopic cinema, so the perception of limitations while watching movies with 3D glasses has been emerged as well. It is not only that the additional glasses are uncomfortable and annoying; there are some tangible arguments for avoiding 3D glasses. These “stereoscopic deficits” are caused by the 3D glasses itself. In contrast to natural viewing with naked eyes, the artificial 3D viewing with 3D glasses introduces specific “unnatural” side effects. The most of the moviegoers has experienced unspecific discomfort in 3D cinema, which they may have associated with insufficient image quality. Obviously, quality problems with 3D glasses can be solved by technical improvement. But this simple answer can -and already has- mislead some decision makers to relax on the existing 3D glasses solution. It needs to be underlined, that there are inherent difficulties with the glasses, which can never be solved with modest advancement; as the 3D glasses initiate them. To overcome the limitations of stereoscopy in display applications, several technologies has been proposed to create a 3D impression without the need of 3D glasses, known as autostereoscopy. But even todays autostereoscopic displays cannot solve all viewing problems and still show limitations. A hyperview display could be a suitable candidate, if it would be possible to create an affordable device and generate the necessary content in an acceptable time frame. All autostereoscopic displays, based on the idea of lightfield, integral photography or super-multiview could be unified within the concept of hyperview. It is essential for functionality that every of these display technologies uses numerous of different perspective images to create the 3D impression. Such a calculation of a very high number of views will require much more computing time as for the formation of a simple stereoscopic image pair. The hyperview concept allows to describe the screen image of any 3D technology just with a simple equation. This formula can be utilized to create a specific hyperview matrix for a certain 3D display – independent of the technology used. A hyperview matrix may contain the references to loads of images and act as an instruction for a subsequent rendering process of particular pixels. Naturally, a single pixel will deliver an image with no resolution and does not provide any idea of the rendered scene. However, by implementing the method of pixel recycling, a 3D image can be perceived, even if all source images are different. It will be proven that several millions of perspectives can be rendered with the support of GPU rendering and benefit from the hyperview matrix. In result, a conventional autostereoscopic display, which is designed to represent only a few perspectives can be used to show a hyperview image by using a suitable hyperview matrix. It will be shown that a millions-of-views-hyperview-image can be presented on a conventional autostereoscopic display. For such an hyperview image it is required that all pixels of the displays are allocated by different source images. Controlled by the hyperview matrix, an adapted renderer can render a full hyperview image in real-time.

In Optogenetics, cells, e.g. neurons or cardiac cells, are genetically altered to produce for example the lightsensitive protein Channelrhodopsin-2. Illuminating these cells induces action potentials or contractions and therefore allows to control electrical activity. Thus, light-induced cell stimulation can be used to gain insight to various biological processes. Many optogenetics studies, however, use only full field illumination and thus gain no local information about their specimen. But using modern spatial light modulators (SLM) in conjunction with computer-generated holograms (CGH), cells may be stimulated locally, thus enabling the research of the foundations of cell networks and cell communications. In our contribution, we present a digital holographic system for the patterned, spatially resolved stimulation of cell networks. We employ a fast ferroelectric liquid crystal on silicon SLM to display CGH at up to 1.7 kHz. With an effective working distance of 33 mm, we achieve a focus of 10 μm at a positioning accuracy of the individual foci of about 8 μm. We utilized our setup for the optogenetic stimulation of clusters of cardiac cells derived from induced pluripotent stem cells and were able to observe contractions correlated to both temporal frequency and spatial power distribution of the light incident on the cell clusters.

Structured light has become a widespread technique for the development of camera-based 3D sensors. The structured illumination provides texture to homogeneous objects and thus allows for the reliable determination of the disparity of each object point in a stereo-camera setting. Even a monocular 3D sensor is possible if the light projector has a fixed relative position to the camera and if the structured light is coded, i.e. the position within the whole light pattern can be reconstructed uniquely from a small local window of the pattern, the uniqueness window. Coded patterns with such a uniqueness property are called Perfect SubMaps (PSM). In our paper we focus on the design and evaluation of the subset of symmetric isolated binary toroidal PSMs (SIBTPSM) for structured light patterns, because of their beneficial properties with respect to the signal-to-noise ratio and the use with laser light sources and DOEs. We define several figures of merit that are relevant for the practical use of PSMs in a 3D sensor: the PSM size, the size of the uniqueness window, the Hamming distance, the density, and the homogeneity. We have created SIBTPSMs using our own dedicated algorithms and have designed and fabricated DOEs that produce these patterns with large fan angles of 61° × 47° when used with near-infrared diode lasers (λ = 830nm). We analyze the influence of these characteristics on the 3D measurement process by theory, simulations, and experiments. The patterns of publicly available DOEs based on SIBTPSMs are used for comparison and reference. Our results show that the PSM width, the uniqueness window size, the minimum and average Hamming distances, and the uniformity have strong impact on either speed or quality of the 3D reconstruction, whereas the point density and the PSM height are of minor importance.

Microscopic techniques with high spatial and temporal resolution are required for in vivo studying biological cells and tissues. Adaptive lenses exhibit strong potential for fast motion-free axial scanning. However, they also lead to a degradation of the achievable resolution because of aberrations. This hurdle can be overcome by digital optical technologies. We present a novel High-and-Low-frequency (HiLo) 3D-microscope using structured illumination and an adaptive lens. Uniform illumination is used to obtain optical sectioning for the high-frequency (Hi) components of the image, and nonuniform illumination is needed to obtain optical sectioning for the low-frequency (Lo) components of the image. Nonuniform illumination is provided by a multimode fiber. It ensures robustness against optical aberrations of the adaptive lens. The depth-of-field of our microscope can be adjusted a-posteriori by computational optics. It enables to create flexible scans, which compensate for irregular axial measurement positions. The adaptive HiLo 3D-microscope provides an axial scanning range of 1 mm with an axial resolution of about 4 microns and sub-micron lateral resolution over the full scanning range. In result, volumetric measurements with high temporal and spatial resolution are provided. Demonstration measurements of zebrafish embryos with reporter gene-driven fluorescence in the thyroid gland are presented.

It is possible to focus coherent light through a multicore fiber with a resolution finer than the core-to-core spacing using digital phase conjugation. In this paper we use the memory effect and show that the displacement of the focus spot can be realized simply by tilting the beam incident on the multicore fiber. We demonstrate high-resolution imaging and pattern projection with a calibration procedure consisting of the acquisition of a single digital hologram.

We report about the implementation of the liquid crystal on silicon (LCOS) microdisplay with 1920 by 1080 resolution and 720 Hz frame rate. The driving solution is FPGA-based. The input signal is converted from the ultrahigh-resolution HDMI 2.0 signal into HD frames, which follow with the specified 720 Hz frame rate. Alternatively the signal is generated directly on the FPGA with built-in pattern generator. The display is showing switching times below 1.5 ms for the selected working temperature. The bit depth of the addressed image achieves 8 bit within each frame. The microdisplay is used in the fringe projection-based 3D sensing system, implemented by Fraunhofer IOF.

Fringe projection profilometry (FPP) has become one of the most popular 3D information acquisition techniques being developed over the past three decades. In FPP, phase unwrapping is a critical step in acquiring the correspondence information for 3D reconstruction. Unlike traditional FPP which uses methods such as temporal phase unwrapping, fast FPP measurement systems require phase unwrapping of single phase map probably with discontinuous objects. Phase unwrapping in fast FPP such brings three difficulties, the separation of discontinuous wrapped phases, the unwrapping of each wrapped phase and the linking of the discontinuous phase segments. During FPP measurement of multiple objects, their corresponding phase maps may locate in different part of the measurement image or side by side. Object separation based on the modulation values along could not well identify the discontinuous boundaries. In this paper, the object separation based on modulation is adapted first to remove the background and separate isolated wrapped phases. For each isolated wrapped phase, local orientation coherence based discontinuous phase separation is further used to identify the existence of discontinuous boundaries. After the segmentation, spatial unwrapping method is applied to each wrapped phase segments. In the last, the phase segments are linked using a base phase map. Experimental results show that our algorithm works well for multiple and overlapping object measurements.

Development of technology makes hyperspectral imaging commonly used for defect detection. In this research, a hyperspectral imaging system was setup in lab to target for guava fruits defect detection. Guava fruit was selected as the object as to our knowledge, there is fewer attempts were made for guava defect detection based on hyperspectral imaging. The common fluorescent light source was used to represent the uncontrolled lighting condition in lab and analysis was carried out in a specific wavelength range due to inefficiency of this particular light source. Based on the data, the reflectance intensity of this specific setup could be categorized in two groups. Sequential feature selection with linear discriminant (LD) and quadratic discriminant (QD) function were used to select features that could potentially be used in defects detection. Besides the ordinary training method, training dataset in discriminant was separated in two to cater for the uncontrolled lighting condition. These two parts were separated based on the brighter and dimmer area. Four evaluation matrixes were evaluated which are LD with common training method, QD with common training method, LD with two part training method and QD with two part training method. These evaluation matrixes were evaluated using F1-score with total 48 defected areas. Experiment shown that F1-score of linear discriminant with the compensated method hitting 0.8 score, which is the highest score among all.

We use digital holography to quantify surface topography of rough objects in full-field. We calculate the variance of the intensity image as a focus metric over a set of reconstruction distances for each pixel, which results in a focus metric curve. The distance where the variance peaks is an estimate for the depth. First we analyze the lateral resolution of this method using the Talbot effect and argue that sub-mm axial resolution is feasible. Then, using a Michelson setup without magnifying optics or lateral scanning we experimentally demonstrate that sub-mm FWHM width of the focus curve can be achieved. This is significantly better than what was previously reported using digital holography and could make this technique useful for characterising objects in art and machine vision.

A visualization technique of sound wave propagation using digital holography with heterodyne technique is presented. In the proposed method, the frequency of the interference pattern in an off-axis digital holography is down converted into the detectable frequency in an image sensor operated at the video frame rate by using the heterodyne interferometer. We present the principle of the recording technique and experimental results are described.

This paper introduces the concept of spectrally resolved digital holography. The measurement principle and the analysis of the data will be discussed in detail. The usefulness of spectrally resolved digital holography is demonstrated for colour imaging and optical metrology with regards to the recovery of modulus information and phase information, respectively. The phase information will be used to measure the shape of an object via the application of the dual wavelength method. Based on the large degree of data available, multiple speckle de-correlated dual wavelength phase maps can be obtained, which when averaged result in a signal to noise ratio improvement.

We have designed a ptychographical algorithm (HIO-PIE) in which HIO (Hybrid Input-Output) iterations are applied for each probe position sequentially. Simulations indicated that HIO-PIE tends to outperform PIE (Ptychographical Iterative Engine) even in the presence of shot noise, especially when the number of probe positions is small. Thus, this adaptation may reduce the number of scan positions required for a successful image reconstruction, thereby relaxing the constraints on an experimental setup. In this article, experimental results obtained using an SLM (spatial light modulator) and visible laser light (633 nm) show that when few probe positions are used, HIO-PIE converges significantly faster than PIE

This paper proposes an approach based on two orthogonal views and two wavelengths for recording off-axis two-color holograms. The approach permits to discriminate particles aligned along the sight-view axis. The digital processing to get images from the particles is based on convolution so as to obtain images with no wavelength dependence. In order to get the images of particles in the 3D volume, a calibration process is proposed and is based on the modulation theorem to perfectly superimpose the two views in a common XYZ axis. The experimental set-up is applied to two-color hologram recording of moving non-calibrated opaque particles with average diameter at about 150μm. After processing the two-color holograms with image reconstruction and view calibration, the location of particles in the 3D volume can be obtained. Particularly, ambiguity about close particles, generating hidden particles in a single-view scheme, can be removed to determine the exact number of particles in the region of interest.

The purpose of this paper is to realize an aerial 3D display. We design optical system that employs a projector below a retro-reflector and a 3D-shaped screen. A floating 3D image is formed with aerial imaging by retro-reflection (AIRR). Our proposed system is composed of a 3D-shaped screen, a projector, a quarter-wave retarder, a retro-reflector, and a reflective polarizer. Because AIRR forms aerial images that are plane-symmetric of the light sources regarding the reflective polarizer, the shape of the 3D screen is inverted from a desired aerial 3D image. In order to expand viewing angle, the 3D-shaped screen is surrounded by a retro-reflector. In order to separate the aerial image from reflected lights on the retro- reflector surface, the retro-reflector is tilted by 30 degrees. A projector is located below the retro-reflector at the same height of the 3D-shaped screen. The optical axis of the projector is orthogonal to the 3D-shaped screen. Scattered light on the 3D-shaped screen forms the aerial 3D image. In order to demonstrate the proposed optical design, a corner-cube-shaped screen is used for the 3D-shaped screen. Thus, the aerial 3D image is a cube that is floating above the reflective polarizer. For example, an aerial green cube is formed by projecting a calculated image on the 3D-shaped screen. The green cube image is digitally inverted in depth by our developed software. Thus, we have succeeded in forming aerial 3D image with our designed optical system.

In this paper, the physical properties of multimode beam are analysed by using the theory of partially coherent light. Based on the spatial coherence measurement results of a multimode fiber laser, we provide a theoretical basis for aberration correction for multimode beams. To improve the beam quality of multimode lasers, phase correction of multimode laser based on a dual-phase-only liquid-crystal spatial light modulator is presented which is used as aberration correction device. The phase distribution was optimized by the stochastic parallel gradient descent algorithm. In this paper the power in the bucket of the far field was used as the evaluation function and the multimode beam included multiple higher order Laguerre-Gaussian beam modes. The real-time aberration correction of Multimode beam by stochastic parallel gradient descent Algorithm is simulated studied and experimental analysed respectively. According to the results the parameters of stochastic parallel gradient descent algorithm can be adjusted and the efficiency and practicability of the algorithm are determined.

One of the most difficult problem in the use of artificial neural networks is the computational capacity. Although large search engine companies own specially developed hardware to provide the necessary computing power, for the conventional user only remains the state of the art method, which is the use of a graphic processing unit (GPU) as a computational basis. Although these processors are well suited for large matrix computations, they need massive energy. Therefore a new processor on the basis of a field programmable gate array (FPGA) has been developed and is optimized for the application of deep learning. This processor is presented in this paper. The processor can be adapted for a particular application (in this paper to an organic farming application). The power consumption is only a fraction of a GPU application and should therefore be well suited for energy-saving applications.

Abstract images with high self-similarity could be used for drug-free stress therapy. This based on the fact that a complex visual environment has a high affective appraisal. To create such an image we can use the setup based on the three laser sources of small power and different colors (Red, Green, Blue), the image is the pattern resulting from the reflecting and refracting by the complicated form object placed into the laser ray paths. The images were obtained experimentally which showed the good therapy effect. However, to find and to choose the object which gives needed image structure is very difficult and requires many trials. The goal of the work is to develop a method and a procedure of finding the object form which if placed into the ray paths can provide the necessary structure of the image In fact the task means obtaining the necessary irradiance distribution on the given surface. Traditionally such problems are solved using the non-imaging optics methods. In the given case this task is very complicated because of the complicated structure of the illuminance distribution and its high non-linearity. Alternative way is to use the projected image of a mask with a given structure. We consider both ways and discuss how they can help to speed up the synthesis procedure for the given abstract image of the high self-similarity for the setups of drug-free therapy.

The paper presents a report on our current work on obtaining the analytic functions of the laser impulses generated by optical choppers with disks in their classical configuration - with windows that have linear margins. With regard to our previous researches, focused on choppers working with top-hat (i.e., with constant intensity) laser beams, in the present work Gaussian laser beam distributions of the light beams to be chopped have been considered, for the most common case, of a light bundle of a sufficient small diameter in the plane of the disk; this type of section can therefore be completely obscured and uncovered by the chopper wings and windows, respectively. The functions of the transmitted light flux of the device are approached. This allows for the designing calculus of choppers for different applications, taking into account their specific requirements. A comparison between analytical results obtained in this work and results from our previous numerical modeling is pointed out.

Polarization imaging plays an important role in various fields, especially for skylight navigation and target identification, whose imaging system is always required to be designed with high resolution, broad band, and single-lens structure. This paper describe such a imaging system based on light field 2.0 camera structure, which can calculate the polarization state and depth distance from reference plane for every objet point within a single shot. This structure, including a modified main lens, a multi-quadrants Polaroid, a honeycomb-liked micro lens array, and a high resolution CCD, is equal to an “eyes array”, with 3 or more polarization imaging “glasses” in front of each “eye”. Therefore, depth can be calculated by matching the relative offset of corresponding patch on neighboring “eyes”, while polarization state by its relative intensity difference, and their resolution will be approximately equal to each other. An application on navigation under clear sky shows that this method has a high accuracy and strong robustness.

An important step for the classification of plants in organic farming is the separation of the objects. In our approach a 3D camera will be used for this task. One problem is that most of the available 3D sensors are not suitable due to their bad resolution, low-speed and high costs. The Kinect II is an affordable alternative but designed for another workspace. In this paper it is shown why a 3D sensor is required for the separation of objects in organic farming and how the modification of a Kinect II 3D camera increases the range resolution to solve the given problem.

We have formed an aerial screen with aerial imaging by retro reflection (AIRR) and detected gestures of a user with a 3D gesture recognition camera. This paper deals with a calibration problem between the coordinate systems of the aerial screen and the camera. We propose a calibration method of the 3D camera and the aerial information screen. We used a Kinect v2 for 3D gesture recognition. The Kinect detects positions of users’ hands up to two users. We developed a calibration software and interactive applications by using Unity. In Unity, we prepared a camera for rendering, objects, and two squares that show hands’ positions. The objects are displayed in the mid-air. Our developed program detects collision between one of the hands and one of the objects. The collision is determined after calibration. The calibration is automatically conducted by adjusting the view angle and the position of the camera in Unity to match the Kinect. In the calibration process, a user is instructed to place one of the hands on four corners of an aerial calibration pattern, one after another. The x-coordinate and y-coordinate of the hand position in the Kinect coordinate system are used to calibrate the central position in Unity. The z-coordinate is used to judge collision because it shows the distance from the hand to the aerial image. We have formed a 43-inch aerial screen. The aerial screen, tilting by 30 degrees, is floating at 35 cm above a reflective polarizer. We have realized aerial interaction.

Motion capture camera (MOCAP) has been widely used in many areas such as biomechanics, physiology, animation, arts, etc. This project is done by approaching physics mechanics and the extended of MOCAP application through sports. Most researchers will use a force plate, but this will only can measure the force of impact, but for us, we are keen to observe the kinematics of the movement. Martial arts is one of the sports that uses more than one part of the human body. For this project, martial art ‘Silat’ was chosen because of its wide practice in Malaysia. 2 performers have been selected, one of them has an experienced in ‘Silat’ practice and another one have no experience at all so that we can compare the energy and force generated by the performers. Every performer will generate a punching with same posture which in this project, two types of punching move were selected. Before the measuring start, a calibration has been done so the software knows the area covered by the camera and reduce the error when analyze by using the T stick that have been pasted with a marker. A punching bag with mass 60 kg was hung on an iron bar as a target. The use of this punching bag is to determine the impact force of a performer when they punch. This punching bag also will be stuck with the optical marker so we can observe the movement after impact. 8 cameras have been used and placed with 2 cameras at every side of the wall with different angle in a rectangular room 270 ft² and the camera covered approximately 50 ft². We covered only a small area so less noise will be detected and make the measurement more accurate. A Marker has been pasted on the limb of the entire hand that we want to observe and measure. A passive marker used in this project has a characteristic to reflect the infrared that being generated by the camera. The infrared will reflected to the camera sensor so the marker position can be detected and show in software. The used of many cameras is to increase the precision and improve the accuracy of the marker. Performer movement was recorded and analyzed using software Cortex motion analysis where velocity and acceleration of a performer movement can be measured. With classical mechanics approach we have estimated the power and force of impact and shows that an experienced performer produces more power and force of impact is higher than the inexperienced performer.

Within the framework of the project, substances are indicators. It is these substances that are the main constituents of a watery suspension found on the surface of Mars. According to the conducted researches, the spectral region for the study of indicator substances was chosen. The method of remote sensing of the surface and the lidar construction scheme are chosen. The results of the preliminary calculation of the system are presented.

A brain tumour is an abnormal growth of tissue in the brain. Most tumour volume measurement processes are carried out manually by the radiographer and radiologist without relying on any auto program. This manual method is a timeconsuming task and may give inaccurate results. Treatment, diagnosis, signs and symptoms of the brain tumours mainly depend on the tumour volume and its location. In this paper, an approach is proposed to improve volume measurement of brain tumors as well as using a new method to determine the brain tumour location. The current study presents a hybrid method that includes two methods. One method is hidden Markov random field - expectation maximization (HMRFEM), which employs a positive initial classification of the image. The other method employs the threshold, which enables the final segmentation. In this method, the tumour volume is calculated using voxel dimension measurements. The brain tumour location was determined accurately in T2- weighted MRI image using a new algorithm. According to the results, this process was proven to be more useful compared to the manual method. Thus, it provides the possibility of calculating the volume and determining location of a brain tumour.

Various applications in optics and photonics employ a Tunable Focus Lens (TFL) to obtain a minimum beam spot of a laser beam at different locations along the direction of beam propagation. Using a TFL to achieve a minimum beam spot size at different planes is critical for several optical imaging and sensing applications. As focal length of TFLs is generally controlled through the amplitude of an input voltage or the current signal, the response time of a TFL-based sensor or imaging system depends on the time required produces a minimum beam spot in the observation plane. Therefore, the system response time or sampling rate depends on the number of voltage/current samples to ascertain a correct focal length value which yields a minimum beam spot. Due to a partial or a total lack of knowledge of the ideal voltage/current value that would produce a minimum beam spot, starting at a corner or a random voltage/current value and incrementally increasing or reducing it would be highly inefficient as converging to a minimum spot might require several steps. We propose an efficient method which results in a significant reduction in the number of voltage/current steps and experimentally validate our claims.

In this paper, we present a novel design of an optical power splitter. Owing to the inherent variable power split ratios that the proposed design delivers, it is ideal for use in communications, sensing and signal processing applications where variable power splitting is often quintessential. The proposed power splitter module is dual mode as it combines the use of a Micro-Electro-Mechanical Systems (MEMS) based Digital Micro-mirror Device (DMD) and an Electronically Controlled Tunable Lens (ECTL) to split the power of an input optical signal between two output ports – the designated port and the surplus port. The use of a reflective Digital Spatial Light Modulator (DSLM) such as the DMD provides a motion-free digital control of the split ratio between the two output ports. Although the digital step between two possible successive split ratios can be fairly minimal with the use of a high resolution DMD but it is a challenge to correctly ascertain the exact image pattern on the DMD to obtain any desired specific split ratio. To counter this challenge, we propose the synchronized use of a circular pattern on the DMD, which serves as a circular clear aperture with a tunable radius, and an ECTL. The radius of the circular pattern on the DMD provides a digital control of the split ratio between the two ports whereas the ECTL, depending on its controller, can provide either an analog or a digital control by altering the beam radius which is incident at the DMD circular pattern. The radius of the circular pattern on the DMD can be minimally changed by one micro-pixel thickness. Setting the radius of the circular pattern on the DMD to an appropriate value provides the closest “ball-park” split ratio whereas further tuning the ECTL aids in slightly altering from this digitally set value to obtain the exact desired split ratio in-between any two digitally-set successive split ratios that correspond to any clear aperture radius of the DMD pattern and its incremental minimal allowable change of one micropixel. We provide a detailed scheme to calculate the desired DMD aperture radius as well as the focal length setting of the ECTL to obtain any given split ratio. By setting tolerance limits on the split ratio, we also show that our method affords diversity by providing multiple possible solutions to achieve a desired optical power split ratio within the specified tolerances. We also demonstrate the validation of the proposed concept with initial experimental results and discussions. These experimental results show a repeatable splitter operation and the resulting power split ratios according to the theoretical predictions. With the experimental data, we also demonstrate the effectiveness of the method in obtaining any particular split ratio through different DMD and ECTL configurations with specific split ratio tolerance values.

In complex optical systems conversion of their characteristics, such, as: a magnification, a focal distance, a field of vision etc., without entering of any changes into the circuitry of the instrument, is carried out by different application of nozzles. In view of the fact that they are, a removable part of an optical system, therefore, shan't influence provisions of input and output pupils of the instrument in general. Most often as those nozzles the calculated telescopic systems and continuous or variable increase are used separately. This operation is devoted to the analysis of the pancratique nozzles with the smooth magnification, with a possibility of their application in high-aperture systems.

Light-spots centroid positions detection is one of the major error sources in the application of Hartmann-Shack (H-S) wavefront sensors. The double images (ghosting) in part of sub-aperture, caused by multiple reflections from optical elements or paraxial stray light from operating environment, result in centroid detection errors and that the precisions of wavefront aberration reconstruction decline. The conventional threshold method often leads to the loss of available information of light-spots, though, by which ghosting can been brought under effective control. In this paper, an improved method and procedure, aiming at ghosting detection and local removal automatically, is proposed by combining several algorithms which include nonlinear processing, autocorrelation, convolution, and local filtering, and so on. Then, the corresponding research has been carried out by a numerical simulation platform established by ourselves, and the results can show that this method and procedure is effective.

Swept Source Optical Coherence Tomography (SS-OCT) relies on the rapid tuning of a broadband light source to produce narrow laser linewidths. Imaging speed is governed by the sweeping frequency of the source and the axial resolution is given by the total bandwidth generated. Mechanical, free space methods, employing rotating polygonal mirrors with a pair of telescopically arranged lenses, can achieve tuning speeds in excess of 100 kHz. Their success relies upon maximising the light throughput of the swept spectrum by reducing the effects of aberration and vignetting caused by the lens design and the geometrical properties of the polygon respectively. However, these properties impose constrictions on the spectral filter’s design and care must be taken when building the filter to avoid unnecessarily limiting the performance of the system. This paper presents some of the initial stages of a much larger study into the optimisation of such systems. Theoretical work has been confirmed by experimental observations and compared with ideal simulations for a spectral filter consisting of a dispersive element, a double lens telescope, arranged in a Littman configuration, and a 72-facet, offaxis polygon mirror with end reflector. A non-linear relationship between the linewidth’s location on the telescope in time with the rotation of the polygon was observed and a first approximation for the tuned wavelength with respect to the polygon rotation angle was found. These observations, coupled with ongoing research, will lead to a complete description of polygon based scanners and how their performance can be optimised in future designs.

Delay-and-Sum (DAS) beamformer is the most common beamforming algorithm in Photoacoustic imaging (PAI) due to its simple implementation and real time imaging. However, it provides poor resolution and high levels of sidelobe. A new algorithm named Delay-Multiply-and-Sum (DMAS) was introduced. Using DMAS leads to lower levels of sidelobe compared to DAS, but resolution is not satisfying yet. In this paper, a novel beamformer is introduced based on the combination of Minimum Variance (MV) adaptive beamforming and DMAS, so-called Minimum Variance-Based DMAS (MVB-DMAS). It is shown that expanding the DMAS equation leads to some terms which contain a DAS equation. It is proposed to use MV adaptive beamformer instead of existing DAS inside the DMAS algebra expansion. MVB-DMAS is evaluated numerically compared to DAS, DMAS and MV and Signal-to-noise ratio (SNR) metric is presented. It is shown that MVB-DMAS leads to higher image quality and SNR for about 13 dB, 3 dB and 2 dB in comparison with DAS, DMAS and MV, respectively.

In this contribution, a novel metric learning framework by jointly optimizing the feature space structural coherence manifested by the Cosine similarity measure and the error contribution induced by the Minkowski metric is presented with a loss function involving Mahalanobis distance measure governing the outlier robustness for maximal inter-sample and minimal intra-sample separation of the feature space vectors. The outlier’s robustness and scale variation sensitivity of the proposed measure by exploiting the prior statistical entropy of the correlated feature components in weighing the different feature dimensions according to their degree of cohesion within the data clusters and the conceptual architecture for the optimality criterion in terms of the optimal Minkowski exponent, ‘poptimal’ through semi-definite convex optimization with its lower and upper bounds of the proposed distance function have been discussed. Classification results involving special cases of the proposed distance measure on publicly available datasets validates the adequacy of the proposed methodology in remote sensing problems.

An augmented set of multifractal parameters with physical interpretations have been proposed to quantify the varying distribution and shape of the multifractal spectrum. The statistical classifier with accuracy of 84.17% validates the adequacy of multi-feature MFDFA characterization of elastic scattering spectroscopy for optical diagnosis of cancer.