Paper
6 December 2016 Effects of chemical etching on the surface quality and the laser induced damage threshold of fused silica optics
Mathilde Pfiffer, Philippe Cormont, Jérôme Néauport, Sébastien Lambert, Evelyne Fargin, Bruno Bousquet, Marc Dussauze
Author Affiliations +
Abstract
Effects of deep wet etching on the surface quality and the laser induced damage probability have been studied on fused silica samples. Results obtained with a HF/HNO3 solution and a KOH solution were compared on both polished pristine surface and scratched surfaces. The hydrofluoric solution radically deteriorated the surface quality creating a haze on the whole surface and increasing considerably the roughness. For both solutions, neither improvement nor deterioration of the laser damage performances has been observed on the etched surfaces while the laser damage resistance of scratches has been increased to the level of the surface. We conclude that laser damage performances are equivalent with both solutions but an acid etching induces surface degradation that is not experienced with basic etching.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mathilde Pfiffer, Philippe Cormont, Jérôme Néauport, Sébastien Lambert, Evelyne Fargin, Bruno Bousquet, and Marc Dussauze "Effects of chemical etching on the surface quality and the laser induced damage threshold of fused silica optics", Proc. SPIE 10014, Laser-Induced Damage in Optical Materials 2016, 1001405 (6 December 2016); https://doi.org/10.1117/12.2244972
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Laser induced damage

Surface finishing

Silica

Polishing

Wet etching

Laser damage threshold

Back to Top