Paper
25 October 2016 Numerical calculation on infrared characteristics of the exhaust plume outside axial-symmetrical nozzle
Yun-song Feng, Wei Jin
Author Affiliations +
Proceedings Volume 10157, Infrared Technology and Applications, and Robot Sensing and Advanced Control; 101571G (2016) https://doi.org/10.1117/12.2246490
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
For mastery of infrared radiation spectral characteristics and intensity distribution of exhaust plume of an axial-symmetrical nozzle, this paper used software Fluent6.3 to simulate the 3-D exterior flow field of the axial-symmetrical nozzle, and obtained the data of the flow field such as temperature, pressure and density, and established the columniform area of computing infrared radiation according to the characteristic of the axial-symmetrical nozzle plume. Then by the finite volumetric method (FVM) and the narrow band model of gases infrared radiation, the spectral characteristic and the total intensity distribution in 3~5μm of exhaust plume infrared radiant were calculated. The results show that the infrared radiation intensity distribution is axial-symmetrical, and the infrared radiation intensity is the feeblest in axial direction and is stronger in π/6~π/3 direction, meanwhile, two peaks of plume infrared radiation emerge in 2.7μm and 4.3μm, and the infrared detector by 4.3μm is in favor of detecting an aircraft.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yun-song Feng and Wei Jin "Numerical calculation on infrared characteristics of the exhaust plume outside axial-symmetrical nozzle", Proc. SPIE 10157, Infrared Technology and Applications, and Robot Sensing and Advanced Control, 101571G (25 October 2016); https://doi.org/10.1117/12.2246490
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared radiation

Thermal modeling

Back to Top