Dimensional stability performance of a CFRP sandwich optical bench for microsatellite payload

N. Desnoyers; P. Goyette; B. Leduc; M.-A. Boucher

doi:10.1117/12.2274311

5 September 2017 Dimensional stability performance of a CFRP sandwich optical bench for microsatellite payload

N. Desnoyers, P. Goyette, B. Leduc, M.-A. Boucher

Proceedings Volume 10372, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems III; 103720G (2017) https://doi.org/10.1117/12.2274311
Event: SPIE Optical Engineering + Applications, 2017, San Diego, California, United States

Abstract

Microsatellite market requires high performance while minimizing mass, volume and cost. Telescopes are specifically targeted by these trade-offs. One of these is to use the optomechanical structure of the telescope to mount electronic devices that may dissipate heat. However, such approach may be problematic in terms of distortions due to the presence of high thermal gradients throughout the telescope structure. To prevent thermal distortions, Carbon Fiber Reinforced Polymer (CFRP) technology can be used for the optomechanical telescope material structure. CFRP is typically about 100 times less sensitive to thermal gradients and its coefficient of thermal expansion (CTE) is about 200 to 600 times lower than standard aluminum alloys according to inhouse measurements. Unfortunately, designing with CFRP material is not as straightforward as with metallic materials. There are many parameters to consider in order to reach the desired dimensional stability under thermal, moisture and vibration exposures. Designing optomechanical structures using CFRP involves many challenges such as interfacing with optics and sometimes dealing with high CTE mounting interface structures like aluminum spacecraft buses. INO has designed a CFRP sandwich telescope structure to demonstrate the achievable performances of such technology. Critical parameters have been optimized to maximize the dimensional stability while meeting the stringent environmental requirements that microsatellite payloads have to comply with. The telescope structure has been tested in vacuum from -40°C to +50°C and has shown a good fit with finite element analysis predictions.

Conference Presentation

Citation Download Citation

N. Desnoyers, P. Goyette, B. Leduc, and M.-A. Boucher "Dimensional stability performance of a CFRP sandwich optical bench for microsatellite payload", Proc. SPIE 10372, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems III, 103720G (5 September 2017); https://doi.org/10.1117/12.2274311

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available