Presentation + Paper
23 August 2017 New developments in laboratory-based x-ray sources and optics
Bernd Hasse, Jenss Schmidt-May, Frank Hertlein, Paul Radcliffe, Carsten Michaelsen
Author Affiliations +
Abstract
Many applications in the field of X-ray analytics require an X-ray beam with a high flux density at the sample position. Examples for these applications are single crystal diffraction or micro-diffraction to name but a few. An X-ray system comprising of an X-ray source with a small electron beam spot size combined with a diffracting 2-dimensional multilayer mirror is the ideal source for these applications. The mirror collects many photons from the small source, especially when it is mounted as close to the source as possible.

To achieve the goal of a high flux density the spot size on the anode of the X-ray tube should be as small as possible with a simultaneous increase of the X-ray power. A risk is the melting of the anode due to weak heat dissipation. At the same time the figure error of the multilayer mirror should be as low as possible. Large figure errors will increase the spot size of the X-ray beam at the sample position.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernd Hasse, Jenss Schmidt-May, Frank Hertlein, Paul Radcliffe, and Carsten Michaelsen "New developments in laboratory-based x-ray sources and optics", Proc. SPIE 10387, Advances in Laboratory-based X-Ray Sources, Optics, and Applications VI, 103870B (23 August 2017); https://doi.org/10.1117/12.2277608
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

X-ray optics

X-ray sources

Analytics

Crystals

Diffraction

Electron beams

Back to Top