Paper
17 May 2018 Design and research of bidirectional surface acoustic wave delay line fabricated using laser ablation method
Dmitry Lukyanov, Alexander Kukaev, Daniil Safronov, Galina Yakubovskaya
Author Affiliations +
Abstract
Today micromechanical gyroscopes are very popular in different areas. Solid-state micromechanical gyroscopes based on surface acoustic waves (SAW) have good vibration and shock resistance because of absence of elastic suspensions, ability to work at 50 000 g loads, small dimensions, cheap in mass production, etc. Unfortunately, there are some limits for further development of such gyroscopes because it requires prototype production in small series. In this study we are investigating laser ablation method. Earlier existing bidirectional delay line produced by photolithography method was modeled in OOFELIEMultiphysics. Frequency response of modeled bidirectional line was at the same level as for existing prototype which can be a confirmation of correct modeling process. As the next step one more prototype was produced by laser ablation method. For this prototype operational characteristics were examined and compared with photolithography bidirectional delay line and with results of finite element modeling. Results of tests and its comparison with modeling and photolithography method are discussed.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dmitry Lukyanov, Alexander Kukaev, Daniil Safronov, and Galina Yakubovskaya "Design and research of bidirectional surface acoustic wave delay line fabricated using laser ablation method", Proc. SPIE 10683, Fiber Lasers and Glass Photonics: Materials through Applications, 106833O (17 May 2018); https://doi.org/10.1117/12.2316420
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prototyping

Laser ablation

Acoustics

Sensors

Finite element methods

Gyroscopes

Optical lithography

Back to Top