A novel design concept to boost the force output of dielectric elastomer membrane actuators

S. Hau; P. Linnebach; G. Rizzello; S. Seelecke

doi:10.1117/12.2514210

13 March 2019 A novel design concept to boost the force output of dielectric elastomer membrane actuators

S. Hau, P. Linnebach, G. Rizzello, S. Seelecke

Proceedings Volume 10966, Electroactive Polymer Actuators and Devices (EAPAD) XXI; 109660N (2019) https://doi.org/10.1117/12.2514210
Event: SPIE Smart Structures + Nondestructive Evaluation, 2019, Denver, Colorado, United States

Abstract

The structure of dielectric elastomer actuators (DEAs) is based on a thin elastomer layer, which is sandwiched in-between compliant electrodes. This capacitor like structure enables to build lightweight and energy efficient actuators with high design flexibility. An applied high voltage leads to a thickness compression and to a simultaneous area expansion of the elastomer, which can be exploited for actuation. Additionally, due to the capacitive nature of DEAs, the application of a DC voltage allows to maintain a position without consuming energy, making such actuators ideal for, e.g., valves. Despite being relatively easy to manufacture and providing large strokes, membrane DEAs suffer from low force outputs (for single layer systems). This paper presents a novel design concept which permits to retune the stroke-force trade-off of DEAs, by allowing to increase force output of the actuator at the expense of a reduced stroke. This is of particular interest for valve applications, which typically need high closing forces and low strokes in the submillimeter regime. The developed system is based on membrane DEAs biased with linear and non-linear springs. Such systems are typically known for high actuation strain and strokes but low force output, even lower in comparison to a single layer membrane DEA only. By means of the novel design concept, the force output of a single layer membrane DEA can be increased by a factor of 3 to 4. The novel actuator concept is initially illustrated, and subsequently validated via a graphical modeling concept on stripin- plane DEAs.

Citation Download Citation

S. Hau, P. Linnebach, G. Rizzello, and S. Seelecke "A novel design concept to boost the force output of dielectric elastomer membrane actuators", Proc. SPIE 10966, Electroactive Polymer Actuators and Devices (EAPAD) XXI, 109660N (13 March 2019); https://doi.org/10.1117/12.2514210

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available