PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
Acousto-optical tunable filters (AOTFs) are well used for practical applications and are most often based on the classical anisotropic non-collinear configuration in tellurium dioxide crystals. Any product sheet of such a commercially available AOTF presents two main features: the tuning range and the spectral bandwidth Δλ. The spectral transmission bandwidth1 is proportional to the ratio λ2 /(bW) where λ is the optical wavelength, b the dispersive constant and W the length of the transducer. The dispersive constant b is a rapidly decreasing function of the wavelength in the blue visible spectrum. As for examples: for a one octave tuning range starting from 400 nm to 800 nm, the spectral bandwidth is multiplied by ~10. For a tuning range in the infrared band 1250-2500 nm, the spectral bandwidth is multiplied by ~4. We present the design of a filter operating in the visible region from 450 nm to 650 nm. A double anisotropic interaction2 is considered allowing the simultaneous diffraction of the two optical modes propagating into the crystal by a single ultrasonic wave. A multi-electrode array of three identical consecutive electrodes Wi:1-3 = 3 mm is deposited on the transducer leading to a more precise control of the spectral bandwidth. The acousto-optic device has been fabricated by the AA-Opto company. With this component the spectral bandwidth is only multiplied by ~2 on from 400 nm to 650 nm.
J. Champagne,J.-C. Kastelik, andS. Dupont
"Multi-electrode array for spectral bandwidth control", Proc. SPIE 11210, Fourteenth School on Acousto-Optics and Applications, 1121007 (11 November 2019); https://doi.org/10.1117/12.2541007
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
J. Champagne, J.-C. Kastelik, S. Dupont, "Multi-electrode array for spectral bandwidth control," Proc. SPIE 11210, Fourteenth School on Acousto-Optics and Applications, 1121007 (11 November 2019); https://doi.org/10.1117/12.2541007