Paper
2 March 2020 Lens design-based optimization of path loss in a high data-rate indoor visible light communication link
Author Affiliations +
Proceedings Volume 11272, Free-Space Laser Communications XXXII; 1127218 (2020) https://doi.org/10.1117/12.2545939
Event: SPIE LASE, 2020, San Francisco, California, United States
Abstract
In this paper, lens design-based optimization of the optical system for a blue laser diode downconverted with remote phosphor based indoor visible light communication link is studied using optical raytracing and experimentally characterized for illumination/ communication performance. Data modulated 450nm blue laser-diode is used to excite a remote-phosphor to down-convert the blue spectrum to white which is transmitted over a direct line-of-sight free-space link and detected using an amplified p-i-n detector. The combination of transmit and receive lenses are optimized in Zemax ray-tracing software with the objective of minimizing the path loss or maximizing the light collection efficiency within the detector area when placed at different transmitter-to-receiver separation distance. It is found that contrary to the typical 1/d2 dependence typically used in VLC system models, the path loss can be minimized at the required link distance by choosing the lens to phosphor and p-i-n detector distance at the transmitter and receiver side respectively. At the optimized location, the VLC link is experimentally characterized by transmitting digital data at a maximum rate of 700 Mbps and bit error rates (BER) obtained is much below 10-3 . BER versus distance is also found to follow the inverse relation of the path-loss versus distance indicating that the optimized lens positions help in achieving improved data through-put due to minimization of the path losses. Optical spectra and color content measurements indicate that the optimized lens positioning results in enhanced blue content at the receive side due to efficient collection of the data modulated blue components at the expense of the green and red components of the down-converted white light. Further improvements to this link can be achieved by simultaneously optimizing performance at multiple wavelengths spanning blue, green and red wavelengths or using lower color temperature phosphors to improve illumination performance, albeit at the expense of some deterioration to the communication performance.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Faheem Ahmad, Sathisha Ramachandrapura Nagaraju, Jyothsna K. M., Rabindra Biswas, and Varun Raghunathan "Lens design-based optimization of path loss in a high data-rate indoor visible light communication link", Proc. SPIE 11272, Free-Space Laser Communications XXXII, 1127218 (2 March 2020); https://doi.org/10.1117/12.2545939
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transmitters

Receivers

Telecommunications

Semiconductor lasers

Lens design

Visible radiation

Light emitting diodes

Back to Top