Fabrication and replication of high efficiency blazed gratings with grayscale electron beam lithography and UV nanoimprint lithography

Marie-Aline Mattelin; Ana Radosavljevic; Jeroen Missinne; Dieter Cuypers; Sander Kommeren; Jos Vandael; Jan Matthijs ter Meulen; Luc Verduyckt; Geert Van Steenberge

doi:10.1117/12.2542171

28 February 2020 Fabrication and replication of high efficiency blazed gratings with grayscale electron beam lithography and UV nanoimprint lithography

Marie-Aline Mattelin, Ana Radosavljevic, Jeroen Missinne, Dieter Cuypers, Sander Kommeren, Jos Vandael, Jan Matthijs ter Meulen, Luc Verduyckt, Geert Van Steenberge

Author Affiliations +

Proceedings Volume 11292, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIII; 1129204 (2020) https://doi.org/10.1117/12.2542171
Event: SPIE OPTO, 2020, San Francisco, California, United States

Abstract

In a waveguide-type display for augmented reality, the image is injected in the waveguide and extracted in front of the eye appearing superimposed on the real world scene. An elegant and compact way of coupling these images in and out is by using blazed gratings, which can achieve high diffraction efficiencies, thereby reducing stray light and decreasing the required power levels. This study investigates the fabrication of blazed gratings with grayscale electron beam lithography and the subsequent replication of the realized 3D grating structures in a polymer material with ultraviolet nanoimprint lithography. As such, diffractive elements are realized on a waveguide sheet, with very good control over the dimensions and the profile of the printed features. Blazed gratings are designed for green light (λ= 543 nm) and a diffraction angle of 43°. Making use of a PMMA resist and by carefully optimizing the electron-beam parameters, electron dose distributions and development step, blazed gratings with a pitch of 508 nm and a fill factor of 0.66 are achieved. Finally, a master is realized with two blazed gratings, 3 cm apart, which are replicated using ultraviolet nanoimprint lithography onto a waveguide sheet. The in- and outcoupling of an image through these two blazed gratings is shown, appearing sharp and non-distorted in the environment, and a throughput efficiency of 17.4% is confirmed.

Conference Presentation

Citation Download Citation

Marie-Aline Mattelin, Ana Radosavljevic, Jeroen Missinne, Dieter Cuypers, Sander Kommeren, Jos Vandael, Jan Matthijs ter Meulen, Luc Verduyckt, and Geert Van Steenberge "Fabrication and replication of high efficiency blazed gratings with grayscale electron beam lithography and UV nanoimprint lithography", Proc. SPIE 11292, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIII, 1129204 (28 February 2020); https://doi.org/10.1117/12.2542171

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available