Paper
23 March 2020 Additional real-time diagnostics on the EBL2 EUV exposure facility
Author Affiliations +
Abstract
The EUV BeamLine 2 (EBL2) is being used to expose samples to EUV radiation for optics and mask lifetime testing. Before and after exposure the samples can be analyzed in-situ by X-ray photoelectron spectroscopy (XPS). During exposure the samples can be monitored in real-time by an imaging ellipsometer. We report on the development of two additional real-time diagnostic systems that further extend the capabilities of the EBL2 system, a thermal imaging system and an EUV reflectometer. The thermal imaging system monitors the sample surface radiation during accelerated lifetime tests and the EUV reflectometer is able to monitor the sample reflectivity in real-time. These diagnostics systems will allow for a more efficient use of the EBL2 beam-time and therefore speed up the development of EUV optics suitable for high source power and high NA imaging.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter van der Walle, Jetske Stortelder, Chien-Ching Wu, Henk Lensen, and Norbert Koster "Additional real-time diagnostics on the EBL2 EUV exposure facility", Proc. SPIE 11323, Extreme Ultraviolet (EUV) Lithography XI, 113231Z (23 March 2020); https://doi.org/10.1117/12.2552011
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet lithography

Extreme ultraviolet

Imaging systems

Diffraction gratings

Reflectometry

Thermography

Reflectivity

Back to Top