Poster + Presentation
22 August 2020 Control of infrared scattering in polymer films and fibers
Author Affiliations +
Conference Poster
Abstract
In this work, UHMWPE films with different additives were successfully fabricated via a combination of solvent-casting and unixial stretching technique at different draw ratio while fibers of high density polyethylene (HDPE) with silicon and oxide microcomposites were produced by melt-spinning consisting of twin-screw extrusion at various collection rates. The SEM images and DSC data showed the film structure becomes highly oriented along stretching direction and its melting temperature and crystallinity changes considerably by increasing the draw ratio, while the diameters of the fiber samples were reduced by increasing the fiber collecting speed and its crystallinity varies insignificantly with respect to the collecting speed. The optical properties of the polyethylene films and fibers were investigated in the long wave infrared (LWIR) spectral range.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yassine Ait-El-Aoud, Elizabeth A. Welsh, Ihsan Uluturk, Richard Pang, Michael Okamoto, Sean R. Dinneen, Alkim Akyurtlu, SeongDon Hong, and Richard M. Osgood III "Control of infrared scattering in polymer films and fibers", Proc. SPIE 11467, Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XVII, 114672B (22 August 2020); https://doi.org/10.1117/12.2568972
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Scattering

Infrared radiation

Polymer thin films

Polymers

Air contamination

Crystals

Back to Top