Presentation
5 March 2021 Coherent beam combining of two single-frequency 200W fiber amplifiers for gravitational wave detectors
Felix Wellmann, Nina Bode, Michael Steinke, Fabian Meylahn, Benno Willke, Ludger Overmeyer, Peter Weßels, Jörg Neumann, Dietmar Kracht
Author Affiliations +
Abstract
Gravitational wave detectors require single-frequency laser sources with challenging requirements regarding beam quality and noise properties. We developed a reliable single-frequency fiber amplifier architecture based on standard step-index large-mode-area fibers and coherently combined two high power beams to enable further power scaling. A combined power of 391 W could be achieved with a combining efficiency of approx. 92 %. The TEM00-mode content of the combined beam was analyzed and a higher-order-mode content of 6.8 % was measured. This yields 365 W linearly polarized output power in the TEM00-mode that is usable for the application.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Felix Wellmann, Nina Bode, Michael Steinke, Fabian Meylahn, Benno Willke, Ludger Overmeyer, Peter Weßels, Jörg Neumann, and Dietmar Kracht "Coherent beam combining of two single-frequency 200W fiber amplifiers for gravitational wave detectors", Proc. SPIE 11665, Fiber Lasers XVIII: Technology and Systems, 116651J (5 March 2021); https://doi.org/10.1117/12.2578085
Advertisement
Advertisement
KEYWORDS
Fiber amplifiers

Sensors

Beam splitters

High power fiber amplifiers

Optical amplifiers

Polarization

Signal generators

Back to Top