Paper
19 November 2021 Calibration method of extrinsic parameters for non-orthogonal shaft laser theodolite measurement system
Author Affiliations +
Proceedings Volume 12059, Tenth International Symposium on Precision Mechanical Measurements; 1205906 (2021) https://doi.org/10.1117/12.2611052
Event: Tenth International Symposium on Precision Mechanical Measurements, 2021, Qingdao, China
Abstract
Non-orthogonal shaft laser theodolite(N-theodolite) measurement system is a new kind of measurement instrument utilized in large-scale metrology, which is made up of two same N-theodolites. To achieve the transformation of N-theodolites’ coordinate systems, a calibration method of extrinsic parameters is proposed. With the help of a scale-bar of a certain length, the calibration can be performed conveniently. The correctness of the calibration method is verified by the measurement experiments of point coordinates and distances. The experimental results show that the RMSE of spatial points and the distances of measured points are 0.319mm and 0.150mm respectively. We demonstrate that the proposed calibration method of extrinsic parameters is feasible for the N-theodolite measurement system.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fengjin Miao, Bin Wu, Zefeng Sun, and Congcong Peng "Calibration method of extrinsic parameters for non-orthogonal shaft laser theodolite measurement system", Proc. SPIE 12059, Tenth International Symposium on Precision Mechanical Measurements, 1205906 (19 November 2021); https://doi.org/10.1117/12.2611052
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

3D metrology

Laser systems engineering

Distance measurement

Laser applications

Laser metrology

Metrology

RELATED CONTENT


Back to Top