Presentation + Paper
30 September 2022 Radiometric measurements for characterizing single photon avalanche diodes
Alexander Skender, Partha Banerjee, Joshua Duran
Author Affiliations +
Abstract
The photon detection efficiencies (PDE) of single photon avalanche diodes (SPADs) are investigated for practical applications such as LiDAR, time-of-flight 3D imaging, fluorescence microscopy, etc. After finding the dark count rate (DCR), radiation from a blackbody source is introduced through a light tube to the SPAD detector. Baffles are used in this tube to prevent light from reflecting off the side of the tube onto the detector. The PDE is then calculated knowing the light incident on the detector, the light detected by the detector, the DCR, and the afterpulsing probability. Measurements for several wavelengths, viz., 500, 615, 808, 900, and 940nm, various blackbody aperture diameters and temperatures, and different baffle diameters are reported. The results are then analyzed to find a range of these parameters that produce consistent results with each other, and compared with manufacturer specifications.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Skender, Partha Banerjee, and Joshua Duran "Radiometric measurements for characterizing single photon avalanche diodes", Proc. SPIE 12234, Infrared Sensors, Devices, and Applications XII, 1223407 (30 September 2022); https://doi.org/10.1117/12.2635240
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Black bodies

Photodetectors

Single photon

Avalanche photodiodes

Temperature metrology

Avalanche photodetectors

Back to Top