Paper
27 November 2023 Full-field modeling and calibration of 3D interference fringe volume with line-shaped Gaussian beam intersection
Author Affiliations +
Abstract
Line-shaped beam based Doppler distance sensors enable 3D inspection of rotating rough surfaces for instance in working lathes by a simultaneous, multipoint velocity and distance measurement. To minimize the systematic error of the measurement, this work presents a high-accuracy 3D model and calibration of the interferometric fringe volume of the sensors. The model is derived from the Gaussian beam expression and applied to describe fringe geometry distribution throughout the intersection volume of two paraxial Gaussian beams. A full-field fringe spacing calibration using a high-resolution matrix camera is performed with two line-shaped beams as a demonstration, which shows an average relative difference of below 0.6% to the modeling result.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Hao Zhang, Jieping Wang, and Shiji Wang "Full-field modeling and calibration of 3D interference fringe volume with line-shaped Gaussian beam intersection", Proc. SPIE 12769, Optical Metrology and Inspection for Industrial Applications X, 127690F (27 November 2023); https://doi.org/10.1117/12.2683552
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Gaussian beams

Modeling

Fringe analysis

Sensors

Doppler effect

Calibration

Back to Top