Presentation + Paper
10 April 2024 Improving OPC model accuracy of dry resist for low k1 EUV patterning
Author Affiliations +
Abstract
Extreme ultraviolet lithography (EUVL) with a NA of 0.33 has been part of high-volume manufacturing since 2019. To guarantee the downscaling of the technology node, advanced material and patterning becomes very critical in terms of resolution, roughness, defectivity and process window. Therefore, several entities are developing new resists and processes. However, to adopt new resist and process into the production, performing model based optical proximity correct (OPC) is an essential step. Thus, an accurate OPC model is required. In this paper, we investigate the calibre CM1 OPC model accuracy of dry resist process, which is conducted on N5 M2 design (pitch 32nm).
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Dongbo Xu, Werner Gillijns, Stewart Wu, Shruti Jambaldinni, Benjamin Kam, Anuja De Sliva, and Germain Fenger "Improving OPC model accuracy of dry resist for low k1 EUV patterning", Proc. SPIE 12954, DTCO and Computational Patterning III, 129540L (10 April 2024); https://doi.org/10.1117/12.3010127
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
SRAF

Printing

Semiconducting wafers

Optical proximity correction

Photoresist processing

Extreme ultraviolet lithography

Calibration

RELATED CONTENT

EUV single patterning validation of curvilinear routing
Proceedings of SPIE (April 28 2023)
Reticle enhancement techniques toward iN7 metal2
Proceedings of SPIE (March 24 2017)
Stochastic model prediction of pattern-failure
Proceedings of SPIE (March 20 2020)
EUV OPC for 56nm metal pitch
Proceedings of SPIE (April 05 2011)
Defect printability study using EUV lithography
Proceedings of SPIE (March 23 2006)

Back to Top