Poster + Paper
20 June 2024 UV-glue-assisted cascaded Fabry-Perot fiber sensor for temperature and force measurement
Author Affiliations +
Conference Poster
Abstract
In this work, we introduce a new concept for an in-line optical fiber temperature and force sensor, which are based on two cascaded Fabry-Perot cavities and the Vernier effect. The sensing cavity is composed of the UV glue, while the reference cavity is composed of the silica fiber. Due to the high thermo-optic coefficient and low Young's modulus of the UV glue in the sensing cavity, this sensor can be used for temperature and force measurements. The obtained temperature and force sensitivity are 8.0 nm/°C and ‒5.44×104 nm/N, respectively.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Xuehao Hu, Hongyu Fu, Pengcheng Li, Hang Qu, Médéric Loyez, and Christophe Caucheteur "UV-glue-assisted cascaded Fabry-Perot fiber sensor for temperature and force measurement", Proc. SPIE 12999, Optical Sensing and Detection VIII, 129992I (20 June 2024); https://doi.org/10.1117/12.3017774
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Sensors

Temperature metrology

Single mode fibers

Ultraviolet radiation

Glues

Vernier effect

Back to Top