Paper
1 October 1990 Self-imaging technique for focusing an IR telescope
Paul Jennison, Loris G. Gregoris, Edward J. Kristufek
Author Affiliations +
Abstract
A method has been developed, whereby the optimum focus of an IR telescope may be determined utilizing self imaging. A set of gold-bars, located adjacent to an array of detectors within a cooled focal plane, are reimaged and scanned across the detector array. The respective spatial and temporal frequencies of the gold bars and external scan mirror are selected to maximize the response of the sensor electronics. The resulting response to this cooled periodic stimulus is Fourier transformed and stored in memory for each location of the focal plane. The optimum focus is determined to be the position where maximum power at the stimulating frequency was obtained.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul Jennison, Loris G. Gregoris, and Edward J. Kristufek "Self-imaging technique for focusing an IR telescope", Proc. SPIE 1309, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing, (1 October 1990); https://doi.org/10.1117/12.21777
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Mirrors

Spatial frequencies

Telescopes

Gold

Modulation transfer functions

Systems modeling

RELATED CONTENT

Near Infrared (1To5 µm) Multichannel Speckle Interferameter
Proceedings of SPIE (January 09 1984)
Sine wave measurements of SPRITE detector MTF
Proceedings of SPIE (September 01 1991)
Infrared Focal Plane Array System Performance Modeling
Proceedings of SPIE (June 30 1982)
A 58 X 62 Pixel Si Ga Array Camera For...
Proceedings of SPIE (April 27 1988)

Back to Top