Paper
10 August 1992 Dual Cone Scanning earth sensor processing algorithms
Todd J. Bednarek
Author Affiliations +
Abstract
The Dual Cone Scanner (DCS) a single-head earth horizon sensor which provides altitude and two-axis attitude information with minimal sun or moon error, will fly on the USAF Phillips Laboratory TAOS mission as part of an autonomous spacecraft navigation demonstration in 1993. These sensors also include an optional sun/moon visible light optical channel and employ a 1750 CPU-based signal processing electronics package. Barnes has since developed an analog processing technique which achieves a significant reduction in weight, power, and cost, making the DCSs available for small satellite applications. Optional features include a light emitting diode built into the detector that can be used for self testing or mission simulations and secondary radiance processing algorithm to reduce errors due to earth radiance variations. The sun/moon detectors used on the TAOS sensors may be incorporated in the new design in the future.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Todd J. Bednarek "Dual Cone Scanning earth sensor processing algorithms", Proc. SPIE 1691, Small Satellite Technologies and Applications II, (10 August 1992); https://doi.org/10.1117/12.138031
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Sun

Scanners

Space operations

Head

Electronics

Satellites

RELATED CONTENT

Optical locator for horizon sensing
Proceedings of SPIE (July 01 1991)
Autonomous star trackers for geostationary satellites
Proceedings of SPIE (October 18 1996)
Star tracker for remote sensing satellites
Proceedings of SPIE (July 05 1994)
Wide angle Earth sensor
Proceedings of SPIE (September 18 1997)
Multi-Detector Thermal Imagers
Proceedings of SPIE (January 21 1985)

Back to Top