Paper
13 January 1993 Zone plate x-ray microscope using a laser plasma source
Hiroaki Aritome, Shigeru Nakayama, Katsumi Mizunoe, Guan-ming Zeng, Hiroyuki Daido, Masahiro Nakatsuka, Sadao Nakai
Author Affiliations +
Abstract
An imaging x-ray microscope using an incoherent laser plasma source and zone plates is reported. The He-like line of 4.03 nm (1 X 1014 photons/sr/pulse) from a carbon plasma produced by a compact glass laser is used as a source. The x-ray source is monochromatized by a condenser zone plate and a pinhole. As an x-ray image detector, a Kodak 101-07 film and an MCP or a cooled backside illuminated CCD are used. An image of the #1000 copper mesh is obtained by a single x-ray pulse at a magnification of 10 by the CCD. In the case of a singe pulse, the magnification is limited so that enough photons are incident on a pixel of the CCD. Thus, the spatial resolution is limited. Further improvement such as an ellipsoidal mirror with multilayer coating is considered to improve the resolution.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroaki Aritome, Shigeru Nakayama, Katsumi Mizunoe, Guan-ming Zeng, Hiroyuki Daido, Masahiro Nakatsuka, and Sadao Nakai "Zone plate x-ray microscope using a laser plasma source", Proc. SPIE 1741, Soft X-Ray Microscopy, (13 January 1993); https://doi.org/10.1117/12.138726
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Zone plates

Plasma

Microscopes

Mirrors

Spatial resolution

X-rays

Back to Top