Paper
8 October 1992 Superconducting tunnel-junction x-ray detectors with niobium absorbers and aluminum quasi-particle traps
Simon E. Labov, Carl A. Mears, George W. Morris, Charles E. Cunningham, Mark A. LeGros, Eric H. Silver, Andrew T. Barfknecht, Norman W. Madden, Don A. Landis, Fred S. Goulding, Roger W. Bland, Kenneth E. Laws
Author Affiliations +
Abstract
We are developing superconducting tunnel junction devices for use as high-resolution, high- efficiency x-ray spectrometers. We have tested devices with niobium x-ray absorbing layers coupled to aluminum layers which serve as quasiparticle traps. These devices were fabricated photolithographically using a modified niobium/aluminum/niobium trilayer fabrication process. Our first devices have a very thin barrier with specific normal state resistance of 1.5 X 10-6 (Omega) cm2, and also exhibit very low leakage current of 15 nA below 200 mK. The energy resolution at 6 keV is 190 eV FWHM, and is limited both by electronic noise and by the non-linear response of the detector.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simon E. Labov, Carl A. Mears, George W. Morris, Charles E. Cunningham, Mark A. LeGros, Eric H. Silver, Andrew T. Barfknecht, Norman W. Madden, Don A. Landis, Fred S. Goulding, Roger W. Bland, and Kenneth E. Laws "Superconducting tunnel-junction x-ray detectors with niobium absorbers and aluminum quasi-particle traps", Proc. SPIE 1743, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy III, (8 October 1992); https://doi.org/10.1117/12.130694
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

X-rays

Quasiparticles

Niobium

Sensors

X-ray astronomy

Superconductors

Back to Top