Paper
30 April 1993 Improved rubidium frequency standards using diode lasers with AM and FM noise control
Csaba Szekely, R. E. Drullinger
Author Affiliations +
Proceedings Volume 1837, Frequency-Stabilized Lasers and Their Applications; (1993) https://doi.org/10.1117/12.143682
Event: Applications in Optical Science and Engineering, 1992, Boston, MA, United States
Abstract
Diode-laser-pumped, rubidium cell frequency standards have potential short-term stability that is vastly better than their lamp-pumped counterparts. However, AM and FM noise in monolithic laser diodes limit their performance. With extended-cavity, grating-feedback diode lasers, the AM and FM noise can be controlled. In the preliminary work reported here, we have used such a laser to make measurements in two different rubidium cell systems. Measured line Q and signal-to-noise ratios corresponding to (sigma) y((tau) ) equals 4 X 10-13 (tau) -1/2 in a commercial, buffer gas type standard and (sigma) y((tau) ) equals 2 X 10-13 (tau) -1/2 in an evacuated, wall-coated cell are demonstrated. We believe both of these numbers can be improved significantly in a fully engineered and optimized standard.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Csaba Szekely and R. E. Drullinger "Improved rubidium frequency standards using diode lasers with AM and FM noise control", Proc. SPIE 1837, Frequency-Stabilized Lasers and Their Applications, (30 April 1993); https://doi.org/10.1117/12.143682
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Rubidium

Fermium

Frequency modulation

Microwave radiation

Semiconductor lasers

Laser stabilization

Lamps

RELATED CONTENT


Back to Top