Paper
31 October 1994 Determination of parameters of transitional layers on metals by linear and nonlinear optical methods
M. U. Belyi, Leonid V. Poperenko, Lubomir I. Robur, Igor A. Shaikevich
Author Affiliations +
Proceedings Volume 2113, Optical Diagnostics of Materials and Devices for Opto-, Micro-, and Quantum Electronics; (1994) https://doi.org/10.1117/12.191983
Event: Optical Diagnostics of Materials and Devices for Opto-, Micro-, and Quantum Electronics: International Workshop, 1993, Kiev, Ukraine
Abstract
The experimental results obtained by methods of linear and nonlinear optics and their discussion for pure metal (Ag, Au, Cu, Al, Ni, Cr), and Fe- and Ni-based amorphous alloys are performed. It is shown that from both linear spectroreflectopolarimetric and the second- harmonic generation data, the parameters characterizing surface roughness may be evaluated, moreover in the latter the sensitivity to the surface effects is in two orders higher than that for ellipsometry. The greater the roughness, the smaller is the intensity of s-component of the second harmonic generation. The structural anisotropy of both sides of the ribbon for amorphous alloys is found. This results in the difference of the principal angles of incidence, measured for two orthogonal orientations relative to p-plane from each of the ribbon's sides.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. U. Belyi, Leonid V. Poperenko, Lubomir I. Robur, and Igor A. Shaikevich "Determination of parameters of transitional layers on metals by linear and nonlinear optical methods", Proc. SPIE 2113, Optical Diagnostics of Materials and Devices for Opto-, Micro-, and Quantum Electronics, (31 October 1994); https://doi.org/10.1117/12.191983
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Ions

Silver

Aluminum

Nickel

Polarization

Scattering

Back to Top