Paper
16 August 1994 3.5-W output, diode-pumped Q-switched 532-nm laser
Hamid Hemmati, James R. Lesh
Author Affiliations +
Abstract
Three 10-W fiber-coupled diode lasers were used to pump a single Nd:YAG laser crystal. Average output powers exceeding 11 W of continuous-wave 1064 nm, and 3.5 W of 532-nm at 50 kHz pulse repetition frequency were achieved. An L- shaped cavity which compensated for thermal lensing in the laser crystal was utilized. The Nd:YAG rod and an acousto-optical Q-switcher were located in one arm of the cavity while a frequency-doubler was in the other arm. The 532 output beam quality (M2) was 1.5.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hamid Hemmati and James R. Lesh "3.5-W output, diode-pumped Q-switched 532-nm laser", Proc. SPIE 2123, Free-Space Laser Communication Technologies VI, (16 August 1994); https://doi.org/10.1117/12.184682
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Laser crystals

Mirrors

Crystals

Nd:YAG lasers

Continuous wave operation

Resonators

RELATED CONTENT

Microchip laser based on Yb:YAG/V:YAG monolith crystal
Proceedings of SPIE (March 16 2016)
Efficient 2-µm Tm:YAP Q-switched and CW lasers
Proceedings of SPIE (February 15 2018)
Continuous wave diode end pumped Nd YAG and Nd...
Proceedings of SPIE (April 29 2008)
Nd YAG V YAG microchip laser generating 1 ns long...
Proceedings of SPIE (May 19 2010)
Nd YVO4 laser operating at 1340 nm and 670 nm...
Proceedings of SPIE (September 30 1996)

Back to Top