Paper
16 August 1994 Laser transmitter assembly for the Optical Communication Demonstrator
Hamid Hemmati, David J. Copeland
Author Affiliations +
Abstract
A modulated fiber-coupled diode laser assembly has been developed. This module will serve as the laser transmitter assembly for the Optical Communication Demonstrator (OCD) system. The laser is capable of greater than 20 mW of output at 100 Mbps Q-PPM modulation. It consists of a high-speed driver, a controller to maintain output amplitude under varying duty cycles, and a temperature controller to control output wavelength. The driver provides over 280 mA of peak modulation current with an optical pulse risetime of approximately 1 ns. The switching speed is limited by the inductance of the laser mount and the cable connecting the driver to the mount. The laser is coupled to a single-mode polarization preserving fiber that can feed directly into the telescope assembly of OCD.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hamid Hemmati and David J. Copeland "Laser transmitter assembly for the Optical Communication Demonstrator", Proc. SPIE 2123, Free-Space Laser Communication Technologies VI, (16 August 1994); https://doi.org/10.1117/12.184654
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Semiconductor lasers

Fiber lasers

Pulsed laser operation

Transmitters

Inductance

Optical communications

Back to Top