Paper
9 September 1994 Limits to performance of evacuated glazing
G. M. Turner, R. E. Collins, A. C. Fischer-Cripps, J. Z. Tang
Author Affiliations +
Proceedings Volume 2255, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XIII; (1994) https://doi.org/10.1117/12.185406
Event: Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XIII, 1994, Freiburg, Germany
Abstract
This paper discusses the performance limitations of evacuated glazing. Evacuated glazing up to at least 1 m2 in area can be rapidly evacuated. The mechanical tensile stresses in evacuated glazing are strongly dependent on the level of insulation achieved, particularly with respect to the pillar array during manufacture. Highly insulating evacuated glazing contains stresses, in regions which can lead to fracture, that are comparable with conventional double glazing. It appears likely that such glazing can withstand temperature differentials of at least 40 degree(s)C. Evacuated glazing consisting of two 1 m2 sheets of 4 mm thick glass, with internal pyrolytically deposited low emittance coatings, has been manufactured with an air-to- air mid-device thermal conductance of approximately 0.85 Wm-2K-1, of which approximately 2/3 is due to radiation and 1/3 to pillar conductance. These samples have negligible gas conductance and an extremely stable internal vacuum at room temperature. Substantially lower values of radiative heat flow would require sputtered transparent low emittance coatings that can withstand the high temperature currently used in the solder glass edge sealing process. Lower pillar conductance can only be achieved using thicker glass sheets, or tempered glass.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. M. Turner, R. E. Collins, A. C. Fischer-Cripps, and J. Z. Tang "Limits to performance of evacuated glazing", Proc. SPIE 2255, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XIII, (9 September 1994); https://doi.org/10.1117/12.185406
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Failure analysis

Manufacturing

Transmittance

Convection

Helium

Atmospheric modeling

RELATED CONTENT

Fail safe design of an all BK 7 glass aircraft...
Proceedings of SPIE (September 28 1994)
Evacuated glazing
Proceedings of SPIE (November 25 1992)

Back to Top