Paper
8 September 1994 Vibration measurements on a car transmission housing
Wolfram Weber, Marco Plieske, Gerhard Brauchle
Author Affiliations +
Proceedings Volume 2358, First International Conference on Vibration Measurements by Laser Techniques: Advances and Applications; (1994) https://doi.org/10.1117/12.185309
Event: Vibration Measurements by Laser Techniques: First International Conference, 1994, Ancona, Italy
Abstract
In view of stricter future statutory requirements concerning noise emissions by motor vehicles, the acoustic optimization of noise emitting components will become increasingly important. Customers complain about transmission noise when for example gears excite individual resonances (eigenfrequencies) of the transmission housing. Normally the eigenfrequencies and also the excitation frequencies are not moveable out of narrow limits. Therefore, in addition to optimizing gear geometry, the transmission housing must be designed so that dynamic forces acting through the gears onto the shaft bearing points lead to minimum level of radiated sound power from the transmission housing. For this reason, the resonance vibration shapes induced on a car transmission under operating conditions were measured using the laser-transmission test rig. Additionally, a comparison was made between the inspection of an empty transmission housing (using finite element calculation and experimental modal analysis).
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wolfram Weber, Marco Plieske, and Gerhard Brauchle "Vibration measurements on a car transmission housing", Proc. SPIE 2358, First International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, (8 September 1994); https://doi.org/10.1117/12.185309
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vibrometry

Acoustics

Inspection

Modal analysis

Back to Top