Paper
19 June 1995 Compound lasers with lens-like media and varying stripe widths: theory and simulation
Alan H. Paxton, Xin-Qiao Wang, Stephen D. Hersee
Author Affiliations +
Abstract
The stripe area of a semiconductor laser with a diverging lenslike medium and a rectangular current-injection stripe is limited by efficiency considerations and by design constraints required to provide a coherent output beam. A larger stripe area is practical in a compound resonator with a lenslike medium in one portion and free expansion of the mode in the other portion. The stripe edges along the direction of propagation should match light rays of the mode on the output pass, at least approximately. Equations for the geometric properties of such a laser are derived, and a numerical simulation indicates that output power in excess of 4 W should be practical impulsed operation. The code did not include thermal effects, so CW operation is not simulated.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alan H. Paxton, Xin-Qiao Wang, and Stephen D. Hersee "Compound lasers with lens-like media and varying stripe widths: theory and simulation", Proc. SPIE 2399, Physics and Simulation of Optoelectronic Devices III, (19 June 1995); https://doi.org/10.1117/12.212504
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical simulations

Lenses

Diffusion

Oscillators

Semiconductor lasers

Computer simulations

Numerical simulations

Back to Top