Paper
6 June 1995 Photomask fabrication of focusing diffractive optical elements using electron-beam lithography
Sergey V. Babin, Victor A. Danilov
Author Affiliations +
Proceedings Volume 2426, 9th Meeting on Optical Engineering in Israel; (1995) https://doi.org/10.1117/12.211192
Event: Optical Engineering in Israel: 9th Meeting, 1994, Tel-Aviv, Israel
Abstract
The electron beam lithography application to diffractive optical elements topology generation is examined. The formula for the estimation of exposure data volume for variable shaped electron beam lithography is presented as a function of diffractive optical element parameters and approximation accuracy. Special software was developed to prepare exposure data for diffractive optical elements fabrication. Diffractive optical elements with an artificial refractive index were manufactured with a feature size much less than the wavelength. Design and experimental results on photomasks fabrication are presented for an optical element focusing irradiation into a ring with ordered parameters. The photomask set was manufactured for reflecting optical element focusing high power CO2 laser beam into two points with required parameters for laser welding.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergey V. Babin and Victor A. Danilov "Photomask fabrication of focusing diffractive optical elements using electron-beam lithography", Proc. SPIE 2426, 9th Meeting on Optical Engineering in Israel, (6 June 1995); https://doi.org/10.1117/12.211192
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffractive optical elements

Electron beam lithography

Photomasks

Lithography

Refractive index

Manufacturing

Zone plates

Back to Top