Paper
19 June 1995 Nondestructive evaluation of thick-composite fatigue damage
Robert E. Green Jr.
Author Affiliations +
Abstract
This paper describes the results of the comparison of a variety of nondestructive evaluation techniques to monitor the development of fatigue damage in thick graphite/epoxy composites. Three inch long, one inch square cross-section test specimens were fatigue tested in compression. Most specimens incorporated stress (strain) concentration notches at their mid- section in order to localize the primary fatigue damage regions in an optimum location for nondestructive monitoring. The nondestructive techniques evaluated were ultrasonic B- and C- scan, ultrasonic velocity and attenuation, ultrasonic second harmonic generation, acoustic microscopy, acoustic emission, thermography, real-time high-speed digital/video laser speckle decorrelation, magnetic resonance imaging, radio-opaque penetrant enhanced x-radiography, and eddy current. Mechanical resonance spectroscopy was used to measure the second order (linear) elastic moduli. Optical and electron microscopy on cut and polished specimens were used to verify the results of the nondestructive tests.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert E. Green Jr. "Nondestructive evaluation of thick-composite fatigue damage", Proc. SPIE 2459, Nondestructive Evaluation of Aging Maritime Applications, (19 June 1995); https://doi.org/10.1117/12.212545
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultrasonics

Composites

Nondestructive evaluation

Speckle

Transducers

Acoustics

Acoustic emission

Back to Top