Paper
24 September 1996 VCSEL array fabricated by selective etching and selective oxidation
ShiMing Lin, Xuejun Kang, Qiming Wang, Junhua Gao, Honghai Gao, Hongjie Wang, Lixuan Wang, Chunhui Zhang
Author Affiliations +
Proceedings Volume 2886, Semiconductor Lasers II; (1996) https://doi.org/10.1117/12.251895
Event: Photonics China '96, 1996, Beijing, China
Abstract
The effects of the thickness of the oxidized layer, reaction temperature and carrier gas flow on the oxidation rate of AlxGa1-xAs-AlAs-GaAs heterostructures are presented. The electrically-pumped GaAs/AlGaAs vertical cavity surface emitting laser 2D arrays fabricated by selective etching and selective oxidation are described. The square current flow aperture of 4 X 4 micrometers 2 are formed by the buried oxidized AlAs layers formed on both top and bottom distributed Bragg reflectors adjacent active region. The serious resistance of the devices are 60 to 80 (Omega) . The continuous-wave threshold current as low as 3.8mA is obtained at room temperature. The devices show the maximum output power over 1mW. Their angles of divergence are less than 7.8 degrees and the pulse rise times are less than 100ps in the high speed pulse response measurements. The 2 X 3 2D arrays are obtained. The thresholds of devices in the array are within 6 +/- 0.5 mA.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
ShiMing Lin, Xuejun Kang, Qiming Wang, Junhua Gao, Honghai Gao, Hongjie Wang, Lixuan Wang, and Chunhui Zhang "VCSEL array fabricated by selective etching and selective oxidation", Proc. SPIE 2886, Semiconductor Lasers II, (24 September 1996); https://doi.org/10.1117/12.251895
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxidation

Vertical cavity surface emitting lasers

Etching

Resistance

Semiconducting wafers

Gallium arsenide

Heterojunctions

Back to Top