Paper
24 September 1996 X-shape optical fiber pressure sensor constituted by a single-mode optical fiber directional coupler with a reflecting end face
Bing Zheng, Zheng Chen
Author Affiliations +
Proceedings Volume 2895, Fiber Optic Sensors V; (1996) https://doi.org/10.1117/12.252181
Event: Photonics China '96, 1996, Beijing, China
Abstract
An X-shape optical fiber pressure sensor has been proposed. The sensor is constituted by a single mode optical fiber directional coupler, at one output end of which a layer of Al-film is evaporated. The output fiber with Al-film covered end serves as a sensing element and self-reference arm as well, and the other to monitor the instability of light source. One of two input ends of the directional coupler acts as an input end of the sensor, another as an output end of the return light signal from the Al-covered output end of the coupler. In principle, the sensor is based on polarization interference caused by transverse pressure. From the normalized intensity of the output light beam and its rotation angle, the pressure can be determined, ranging from 0 to 120,000 dyne/cm.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bing Zheng and Zheng Chen "X-shape optical fiber pressure sensor constituted by a single-mode optical fiber directional coupler with a reflecting end face", Proc. SPIE 2895, Fiber Optic Sensors V, (24 September 1996); https://doi.org/10.1117/12.252181
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Optical fibers

Directional couplers

Polarizers

Polarization

Single mode fibers

Phase shifts

Back to Top