Paper
21 November 1997 Two-phase annular flow in vertical and horizontal pipes using laser techniques
Ayse Altunbas, Sohail H. Zaidi, J. H. Hills, B. J. Azzopardi
Author Affiliations +
Abstract
Measurement of drop size distributions in annular two phase flow is required in many parts of industry. In the oil industry this information is needed as the drop sizes in the flow affect heat and mass transfer, pressure drops and also processes like erosion and corrosion. Laser techniques are well suited for this kind of study. In the present work, drop size distributions have been measured in a 38 mm diameter tube in vertical and horizontal positions. Phase Doppler and laser diffraction techniques have been employed for this purpose. Data has been collected for various flow conditions and has been compared with that previously obtained for 32 mm and 20 mm diameter tubes. The effect of pipe orientation on drop sizes has also been analyzed and some typical results have been produced.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ayse Altunbas, Sohail H. Zaidi, J. H. Hills, and B. J. Azzopardi "Two-phase annular flow in vertical and horizontal pipes using laser techniques", Proc. SPIE 3172, Optical Technology in Fluid, Thermal, and Combustion Flow III, (21 November 1997); https://doi.org/10.1117/12.293418
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Doppler effect

Diffraction

Particles

Signal processing

Analytical research

Corrosion

Back to Top