Paper
20 April 1998 High-power VCSELs: modeling and experimental characterization
Rainer Michalzik, Martin Grabherr, Karl Joachim Ebeling
Author Affiliations +
Abstract
Broad-area oxide confined vertical cavity surface emitting lasers are investigated theoretically and experimentally as high-power laser sources. A self-consistent laser model comprising current and temperature distribution, carrier diffusion, and a simplified optical submodel is employed to explain measured output characteristics. Top and bottom emitting devices of various diameters are designed and fabricated and the scaling laws for various laser parameters are extracted. A comparison between both emission schemes is provided. Maximum output powers of 180 mW and 350 mW obtained from both top emitters and heat-sink mounted bottom emitters of 150 micrometers and 200 micrometers active diameter, respectively, represent the state-of-the-art. Even higher output powers at improved conversion efficiencies are suggested to be obtained from densely spaced 2D arrays with properly applied heat-sinking.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rainer Michalzik, Martin Grabherr, and Karl Joachim Ebeling "High-power VCSELs: modeling and experimental characterization", Proc. SPIE 3286, Vertical-Cavity Surface-Emitting Lasers II, (20 April 1998); https://doi.org/10.1117/12.305461
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Resistance

Oxides

Diffusion

Quantum efficiency

Quantum wells

Reflectors

Back to Top