ArF excimer laser lithography with bottom antireflective coating

Shinji Kishimura; Makoto Takahashi; Keisuke Nakazawa; Takeshi Ohfuji; Masaru Sasago; Masaya Uematsu; Tohru Ogawa; Hiroshi Ohtsuka

doi:10.1117/12.310760

29 June 1998 ArF excimer laser lithography with bottom antireflective coating

Shinji Kishimura, Makoto Takahashi, Keisuke Nakazawa, Takeshi Ohfuji, Masaru Sasago, Masaya Uematsu, Tohru Ogawa, Hiroshi Ohtsuka

Author Affiliations +

Proceedings Volume 3334, Optical Microlithography XI; (1998) https://doi.org/10.1117/12.310760
Event: 23rd Annual International Symposium on Microlithography, 1998, Santa Clara, CA, United States

Abstract

In ArF excimer laser lithography, the bottom antireflective coating (BARC) technique is essential in inhibiting the effect of interference and reflective notching. We investigated the antireflective effect of commercially available organic BARCs, that had originally been designed for KrF and i-line lithography, and also the patterning characteristics of ArF resists with BARCs. The refractive indices of various materials were measured with a spectroscopic ellipsometer. The real part (n) and the imaginary part (k) of the complex refractive index at 193 nm were 1.4 to 1.7 and 0.1 to 0.8 respectively. Almost all the materials had sufficient antireflectivity at 193 nm. We investigated the patterning characteristics of chemically amplified ArF positive resists with suitable BARC materials. The resolution, the depth-of- focus of patterns below 0.16-micrometer lines and spaces, and the exposure latitude were improved and good critical dimensional control over topography was achieved by using BARC. An acceptable profile after gate structure (BARC, W-Si, and Poly-Si) etching could be obtained under the typical etching conditions used for KrF resists.

Citation Download Citation

Shinji Kishimura, Makoto Takahashi, Keisuke Nakazawa, Takeshi Ohfuji, Masaru Sasago, Masaya Uematsu, Tohru Ogawa, and Hiroshi Ohtsuka "ArF excimer laser lithography with bottom antireflective coating", Proc. SPIE 3334, Optical Microlithography XI, (29 June 1998); https://doi.org/10.1117/12.310760

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE