New type of dielectric bolometer mode of detector pixel using ferroelectric thin film capacitors for an infrared image sensor

Minoru Noda; Ryuichi Kubo; Hidekazu Tanaka; Tomonori Mukaigawa; Kazuhiko Hashimoto; Huaping Xu; Masanori Okuyama

doi:10.1117/12.328066

26 October 1998 New type of dielectric bolometer mode of detector pixel using ferroelectric thin film capacitors for an infrared image sensor

Minoru Noda, Ryuichi Kubo, Hidekazu Tanaka, Tomonori Mukaigawa, Kazuhiko Hashimoto, Huaping Xu, Masanori Okuyama

Author Affiliations +

Proceedings Volume 3436, Infrared Technology and Applications XXIV; (1998) https://doi.org/10.1117/12.328066
Event: SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, 1998, San Diego, CA, United States

Abstract

We have developed a new type of detector pixel circuit operated in an infrared image sensor of dielectric bolometer mode. The detector pixel consists of capacitors of ferroelectric BST (Ba_1-xSr_xTiO₃) thin film, whose dielectric constant changes drastically with temperature. Our proposed circuit is a serially connected capacitor-capacitor, where one capacitor is composed of a BST ferroelectric thin film irradiated by infrared light and the other is nonirradiated one. BST film has been prepared on Si membrane structure by laser ablation. Dielectric constant of the BST film, which is about 450 at 25 degrees Celsius, changes by about 1 to 10%/K in ambient temperature. The maximum change is as large as about 100/K, and more than about 10%/K relative change in the dielectric constant or the corresponding capacitance has been induced. As a result of on-board evaluation of the assembled circuit with a source-follower output, the output level is about 40 mV when a relative capacitance change in the capacitor is about 3%. On the other hand, in PSPICE circuit simulations, the output level is about 25 mV when a relative capacitance change in the capacitor of about 100 pF is 1%. The simulated relationship between the output voltage and capacitance change of the BST film in the assembled circuit agrees well with that in the experimental results. It is considered that the circuit has enough output signal level for input of conventional operational amplifier. Calculated thermal responsivity R_v, and specific detectivity D* are 50 kV/W and 6.5 X 10⁹ cm (DOT) Hz^1/2/W, respectively, which means high-sensitivity compared to the other type of IR sensors. The pixel structure also shows a simple configuration, and then is very effective in reducing their pixel size and then increasing the pixel density.

Citation Download Citation

Minoru Noda, Ryuichi Kubo, Hidekazu Tanaka, Tomonori Mukaigawa, Kazuhiko Hashimoto, Huaping Xu, and Masanori Okuyama "New type of dielectric bolometer mode of detector pixel using ferroelectric thin film capacitors for an infrared image sensor", Proc. SPIE 3436, Infrared Technology and Applications XXIV, (26 October 1998); https://doi.org/10.1117/12.328066

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available