Paper
3 October 1998 Optical assembly of a visible-through-thermal infrared multispectral imaging system
Tammy D. Henson, Steven C. Bender, Donald A. Byrd, William M. Rappoport, GonYen Shen
Author Affiliations +
Abstract
The Optical Assembly (OA) for the Multispectral Thermal Imger (MTI) program has been fabricated, assembled, and successfully tested for its performance. It represents a major milestone achieved towards completion of this earth observing EO imaging sensor that is to be operated in low earth orbit. Along with its wide field of view, 1.82 degrees along-track and 1.38 degrees cross-track, and comprehensive on-board calibration system, the pushbroom imaging sensor employs a single mechanically cooled focal plane with 15 spectral bands covering a wavelength range from 0.45 to 10.7 micrometers . The OA has an off-axis three-mirror anastigmatic telescope with a 36-cm unobscured clear aperture. The two key performance criteria, 80 percent enpixeled energy in the visible and radiometric stability of 1 percent 1 (sigma) in the visible/near-IR and short wavelength IR, of 1.45 percent 1 (sigma) in the medium wavelength IR, and of 0.53 percent 1 (sigma) long wavelength IR, as well as its low weight and volume constraint drive the overall design configuration of the OA and fabrication requirements.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tammy D. Henson, Steven C. Bender, Donald A. Byrd, William M. Rappoport, and GonYen Shen "Optical assembly of a visible-through-thermal infrared multispectral imaging system", Proc. SPIE 3439, Earth Observing Systems III, (3 October 1998); https://doi.org/10.1117/12.325614
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Mirrors

Optical fabrication

Telescopes

Wavefronts

Black bodies

Infrared radiation

Back to Top