High-resolution high fill factor a-Si:H sensor arrays for medical imaging

Jeffrey T. Rahn; Francesco Lemmi; Richard L. Weisfield; Rene Lujan; Ping Mei; Jeng-Ping Lu; Jackson Ho; Steve E. Ready; Raj B. Apte; Per Nylen; James B. Boyce; Robert A. Street

doi:10.1117/12.349529

28 May 1999 High-resolution high fill factor a-Si:H sensor arrays for medical imaging

Jeffrey T. Rahn, Francesco Lemmi, Richard L. Weisfield, Rene Lujan, Ping Mei, Jeng-Ping Lu, Jackson Ho, Steve E. Ready, Raj B. Apte, Per Nylen, James B. Boyce, Robert A. Street

Author Affiliations +

Proceedings Volume 3659, Medical Imaging 1999: Physics of Medical Imaging; (1999) https://doi.org/10.1117/12.349529
Event: Medical Imaging '99, 1999, San Diego, CA, United States

Abstract

We describe new amorphous silicon (a-Si:H) image sensor arrays which are the highest resolution imagers so far reported. The pixel sizes of 64 micrometer (resolution 8 lp/mm) and 75 micrometer (6.7 lp/mm) are made possible using a photodiode technology that enables high sensor fill factor even in very small pixels. This approach allows the a-Si:H imagers to satisfy high resolution requirements of digital mammography. Each array contains 512 X 512 pixels with matrix addressing provided by a-Si:H thin film transistors (TFT). The high fill factor structure contains a continuous a-Si:H photodiode layer grown on top of the TFT array, with contacts to each pixel through a patterned metal/n⁺ layer. X-ray detection is accomplished by use of a phosphor layer superimposed on the array. The continuous photodiode layer maximizes light absorption from the phosphor and provides high x-ray conversion efficiency. Since the photodiode forms a continuous layer, crosstalk between adjacent pixels due to the lack of isolation is a particular concern, and has been extensively studied. We find that the high fill factor structure can be made such that the lateral charge leakage is minimal in the dark or under moderate illumination, although small amount of charge spreading is observed under conditions of sensor saturation. The measured MTF for optical illumination exceeds 60% at the Nyquist frequency, even for long integration times.

Citation Download Citation

Jeffrey T. Rahn, Francesco Lemmi, Richard L. Weisfield, Rene Lujan, Ping Mei, Jeng-Ping Lu, Jackson Ho, Steve E. Ready, Raj B. Apte, Per Nylen, James B. Boyce, and Robert A. Street "High-resolution high fill factor a-Si:H sensor arrays for medical imaging", Proc. SPIE 3659, Medical Imaging 1999: Physics of Medical Imaging, (28 May 1999); https://doi.org/10.1117/12.349529

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available