Paper
25 June 1999 In-line holography using a point source
Author Affiliations +
Abstract
Conventional scanning electron microscopes are now close to the limit of their performance for tasks such as the metrology of sub-micron design rule devices. In order to overcome these limits we are investigating the use of in- line electron holography for device metrology. This device will use ultra-low energy electrons emitted from a nano-tip electron source. Out of focus holograms of a mesh were simulated and reconstructed in the transmission mode of the microscope whereas in the reflection mode a sample consisting of only two points was used. In both operation modes of the microscope it is possible to change the distance from the point source to the sample and the distance from the sample to the detector plane such that the magnification is kept constant. Series of simulated holograms consisting of only a few points reveal the distances resulting in the easiest interpretable images. When in-line holography is performed using electrons, the beams are deflected by the electric field between point source and sample. Ray tracing of the electrons performed by solving the appropriate Laplace equation can help to determine an optimum geometry for the microscope.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernhard G. Frost and David C. Joy "In-line holography using a point source", Proc. SPIE 3676, Emerging Lithographic Technologies III, (25 June 1999); https://doi.org/10.1117/12.351149
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

Microscopes

Sensors

Optical simulations

Holography

Chemical species

3D image reconstruction

RELATED CONTENT


Back to Top