Electrostatically driven micromachined nickel resonators and gyroscopes

Olaf Renken; Wolfgang Benecke

doi:10.1117/12.341264

10 March 1999 Electrostatically driven micromachined nickel resonators and gyroscopes

Olaf Renken, Wolfgang Benecke

Author Affiliations +

Proceedings Volume 3680, Design, Test, and Microfabrication of MEMS and MOEMS; (1999) https://doi.org/10.1117/12.341264
Event: Design, Test, and Microfabrication of MEMS/MOEMS, 1999, Paris, France

Abstract

A low temperature back-end process for micromachined electroplated vibrating structures has been developed. It is supposed to be processed on top of available ASIC's, independent on fabrication technology of ASIC's. Structures can be fabricate without a cap as well as encapsulated. Undesired underetching of the plating base could be overcome by an oxidation process step. Thus, the minimum width of fixed structures could be significantly reduced. To evaluate mechanical properties of electroplated moveable nickel structures, single-mass resonators have been laid out and fabricated. Moreover, the single-mass structure is representative for excitation mode of a gyroscope, which is composed of two masses, one for excitation and detection mode each. The sensor system is mechanically decoupled as the in-plane vibration modes of excitation and detection mode are perpendicular to each other. To accomplish large deflection, lateral vibration spring-mass systems are used. The resonators are electrostatically excited using comb drives. Deflections of 19 micrometers are obtained and nickel resonators show Q-factor of up to 1500. Deposition of nickel structures has been accomplished using a commercially available nickel sulfamate-based solution. Initial fatigue testing of nickel microresonators has been carried out. There is no measurable fatigue after an operating time of 250 hours.

Citation Download Citation

Olaf Renken and Wolfgang Benecke "Electrostatically driven micromachined nickel resonators and gyroscopes", Proc. SPIE 3680, Design, Test, and Microfabrication of MEMS and MOEMS, (10 March 1999); https://doi.org/10.1117/12.341264

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE