Paper
1 October 1999 X-ray and gamma-ray spectroscopy with segmented CdZnTe detectors
A. Shor, Yossi Eisen, Israel D. Mardor
Author Affiliations +
Abstract
Two methods are presented for obtaining excellent spectroscopic performance and good photo-peak efficiencies for CdZnTe coarsely segmented pad and strip detectors. The `correlation method' utilizes the correlation between the signals in the planar and segmented electrodes. This correlation provides an indication of the point of interaction. Application of a correction which is based on this correlation generates spectra with a resolution of 1.4% FWHM at 356 keV for pad detectors. Furthermore, for strip detectors this method yields improved spectra and an increase of more than 35% in photo-peak efficiencies at 140.5 keV. The `compensation method' involves tuning the degree of electron trapping to compensate for the almost completely trapped holes. Contrary to planar detectors, for segmented detectors the compensation condition yields induced charge signals which are 80% of the maximum signal. Using this method we obtained a spectrum with energy resolution of 3.5% FWHM at 122 keV and a peak-to-valley ratio of approximately 100:1.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Shor, Yossi Eisen, and Israel D. Mardor "X-ray and gamma-ray spectroscopy with segmented CdZnTe detectors", Proc. SPIE 3769, Penetrating Radiation Systems and Applications, (1 October 1999); https://doi.org/10.1117/12.363692
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Electrodes

Signal detection

Photons

Electronics

Spectroscopy

X-rays

RELATED CONTENT


Back to Top