Paper
27 October 1999 Nd3+-doped LiTaO3 films and powders through the sol-gel route
Shi De Cheng, Chan Hin Kam, Yan Zhou, Yee Loy Lam, Yuen Chuen Chan
Author Affiliations +
Abstract
Nd3+-doped LiTaO3 is successfully derived by the sol-gel method. The host solution is prepared by mixing LiOC2H5 and Ta(OC2H5)5 and different concentrations of 1.0, 2.0, and 3.0 mol% of Nd3+ are introduced. The films are deposited on SiO2/Si substrate by spin coating and the powders are prepared by sintering the precipitation of the solution. XRD and micro-Raman studies show that the material displays good crystallization of pure trigonal phase of LiTaO3. AFM and SEM studies reveal that the crystalline size is about several tens of nanometers for the films and a few hundred nanometers for the powders after an annealing at 600 degree(s)C. Using the 488 nm line of an Ar+ laser as an excitation source, photoluminescence of the powders is observed at 1.06 micrometers , corresponding to the 4F3/2 yields 4I11/2 transition of Nd3+. The full width at half maximum is about 40 nm.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shi De Cheng, Chan Hin Kam, Yan Zhou, Yee Loy Lam, and Yuen Chuen Chan "Nd3+-doped LiTaO3 films and powders through the sol-gel route", Proc. SPIE 3803, Materials and Devices for Photonic Circuits, (27 October 1999); https://doi.org/10.1117/12.366750
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Sol-gels

Luminescence

Annealing

Scanning electron microscopy

Micro raman spectroscopy

Thin films

Back to Top