Reticle process effects on OPC models

Travis E. Brist; George E. Bailey

doi:10.1117/12.474521

30 July 2002 Reticle process effects on OPC models

Travis E. Brist, George E. Bailey

Proceedings Volume 4691, Optical Microlithography XV; (2002) https://doi.org/10.1117/12.474521
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

As critical dimensions (CDs) approach (lambda) /2, the use of optical proximity correction (OPC) relies heavily on the ability of the mask vendor to resolve the OPC structures consistently. When an OPC model is generated the reticle and wafer processing errors are merged, quantified, and fit to a theoretical model. The effectiveness of the OPC model depends greatly on model fit and therefore consistency in the reticle and wafer processing. Variations in either process can 'break' the model resulting in the wrong corrections being applied. Work is being done in an attempt to model the reticle and wafer processes separately as a means to allow an OPC model to be implemented in any mask process. Until this is possible, reticle factors will always be embedded in the model and need to be understood and controlled. Reticle manufacturing variables that effect OPC models are exposure tool resolution, etch process effects, and process push (pre-bias of the fractured data). Most of the errors from these reticle-manufacturing variables are seen during model generation, but there are some regions that are not and fail to be accounted for such as extremes in the line ends. Since these extreme regions of the mask containing the OPC have a higher mask error enhancement factor (MEEF) than that of the rest of the mask, controlling mask-induced variables is even more important. This paper quantifies the reticle error between different write tools (g-line vs. i-line vs. DUV lasers) and shows the effects reticle processing has on OPC model generation. It also depicts which structures are susceptible to reticle error more than others through reticle modeling and SEM images.

Citation Download Citation

Travis E. Brist and George E. Bailey "Reticle process effects on OPC models", Proc. SPIE 4691, Optical Microlithography XV, (30 July 2002); https://doi.org/10.1117/12.474521

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available