Sub-0.10-um lithography technology with resolution enhancement technique

Gek Soon Chua; Qunying Lin; Cho Jui Tay; Chenggen Quan

doi:10.1117/12.474544

30 July 2002 Sub-0.10-μm lithography technology with resolution enhancement technique

Gek Soon Chua, Qunying Lin, Cho Jui Tay, Chenggen Quan

Author Affiliations +

Proceedings Volume 4691, Optical Microlithography XV; (2002) https://doi.org/10.1117/12.474544
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Reduction of feature sizes in semiconductor circuits has pushed photolithography to print features below the wavelength of the light source. However, severe optical proximity effects and small depth of focus for isolated lines have brought challenges to sub-wavelength lithography for application to 0.10micrometers technology using 248nm and 193nm scanners. Resolution Enhancement Technique (RET) is applied extensively for 0.10 micrometers technology. The use of attenuated phase shift masks to improve the process latitude is well known from literature, however higher transmission attPSM is limited by side-lobe printing. In order to achieve desired critical dimension control, OPC is necessary needed with PSM. Although off-axis illumination improves resolution for dense features, it degrades exposure latitude and depth of focus for sparse features. Applying scattering bars (SB), also called assisting features, to an isolated line can modify the diffraction pattern similar to that generated by dense lines. A comprehensive study on how scattering bars could affect the performance of isolated and dense lines by adjusting their bar size and placement to the main feature edges as well as changing the illumination condition and exposure energy are performed. It is showed that SB is able to increase the depth of focus for isolated line and an acceptable 0.10 micrometers patterning process is achieved. Furthermore, SB-OPC helps minimize the negative impact due to lens aberration on isolated features. The results demonstrate that SB-OPC is one of the most manufacturable solutions for sub-0.10 micrometers line patterning using current DUV lithography.

Citation Download Citation

Gek Soon Chua, Qunying Lin, Cho Jui Tay, and Chenggen Quan "Sub-0.10-μm lithography technology with resolution enhancement technique", Proc. SPIE 4691, Optical Microlithography XV, (30 July 2002); https://doi.org/10.1117/12.474544

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE