Paper
7 June 2002 Multiview 3D display system based on volume holographic lenticular element
Byung-Chul Cho, Sang-Woo Lee, Jung-Sik Gu, Eun-Soo Kim
Author Affiliations +
Abstract
In this paper, a new VHLE(volume holographic lenticular element)-based multiview autostereoscopic 3D display system is proposed and implemented. In the proposed system, the lenticular sheet which has been used in the conventional autostereoscopic 3D display system is optically implemented by using the multiplexed volume hologram, which is called a VHLE. Thus, like the conventional lenticular sheet, the VHLE can be used as an optical directional modulator in the multiview stereoscophic display system. This VHLE can be made by using the volume holographic technique in which both of angular multiplexing and space-division multiplexing are used to record the diffraction gratings in the holographic recording materials. Once the diffraction gratings are recorded in the volume hologram, then this holographic device can play the same role of the conventional lenticular sheet. In addition, a design tool for synthesizing the VHLE for the implementation of an arbitrary multiview 3D display system is also discussed. Through some experimental results, a possibility of implementing the VHLE-based multiview autostereoscopic display system is presented.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Byung-Chul Cho, Sang-Woo Lee, Jung-Sik Gu, and Eun-Soo Kim "Multiview 3D display system based on volume holographic lenticular element", Proc. SPIE 4735, Hybrid Image and Signal Processing VIII, (7 June 2002); https://doi.org/10.1117/12.470111
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D displays

Holography

LCDs

Volume holography

Holograms

Stereoscopic displays

Diffraction gratings

Back to Top