Paper
20 September 2002 Improvement of the position linearity in a comb-type one-dimensional position sensitive detector
Jiuyao Tang, Meizhen Huang, Hoseob Kim
Author Affiliations +
Abstract
In a conventional, strip-type one-dimensional (1-D) position sensitive detector (PSD) the sensitive area and the position resistance area are combined together, the contact structure of the device is handicapped, so its accuracy and linearity is affected adversely. The sensitive area and the position resistance area in a new, comb-type 1-D PSD are separated to become the comb teeth and the comb ridge area respectively, moreover the position resistance area is made very narrow, thus the doping uniformity of that area is greatly improved. On the other hand, its position resistance can be largely increased owing to its narrower shape, if doping level is kept the same, so the restriction that is imposed on the contact structure previously can be lifted. Our measurements made on a strip-type 1-D PSD and a comb type 1-D PSD confirmed this difference, and showed that the accuracy and linearity of the comb type 1-D PSD has been increased markedly, especially the RMS nonlinearity of the comb type 1-D PSD is reduced to 0.090% from that of the strip-type 1-D PSD, 0.94%.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiuyao Tang, Meizhen Huang, and Hoseob Kim "Improvement of the position linearity in a comb-type one-dimensional position sensitive detector", Proc. SPIE 4919, Advanced Materials and Devices for Sensing and Imaging, (20 September 2002); https://doi.org/10.1117/12.471855
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Sensors

Teeth

Doping

Analog electronics

Light emitting diodes

Metals

Back to Top