Paper
20 September 2002 Measurement of dew droplets in initial deposition at dew point by using a phase-shift interference microscope
Author Affiliations +
Abstract
In order to measure the total mass per unit area of dew droplets deposited on a metal plate in the dew-point hygrometer, the shape of a dew droplet deposited on a copper plate was measured accurately by using an interference microscope that employed a phase-shift technique. The microscope was constructed by adding a piezoelectric transducer to an usual interference microscope. A simple method that uses a conventional speaker horn and an optical fiber cable was introduced to depress speckle noise. The shape of a dew droplet deposited on the copper plate surface with 0.1 μm in average roughness was measured with an accuracy of ±3nm. The mass of a dew droplet could be calculated numerically from the volume of its shape and was of the order of 10-9 g. The total mass of dew droplets deposited per unit area and the deposition velocity were obtained under a gentle wind. The total mass was the order of 10-5 g/cm2 at the beginning of deposition and the deposition velocity was ranged from 2x10-6 to 6x10-5 g/cm2.min.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shigeaki Matsumoto, Satoru Toyooka, and Mitsuo Hoshino "Measurement of dew droplets in initial deposition at dew point by using a phase-shift interference microscope", Proc. SPIE 4919, Advanced Materials and Devices for Sensing and Imaging, (20 September 2002); https://doi.org/10.1117/12.465826
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Directed energy weapons

Microscopes

Copper

Optical fiber cables

Mirrors

Speckle

Surface finishing

RELATED CONTENT

Control of a tiny dew droplet deposited on a copper...
Proceedings of SPIE (August 29 2008)
Roof Edge Test (RET) For Micro-Roughness
Proceedings of SPIE (January 01 1987)
The Art Of Metal Polishing
Proceedings of SPIE (January 15 1976)
Optical Methods Of Measuring Rough Surfaces
Proceedings of SPIE (March 21 1989)

Back to Top