Paper
27 May 2003 Measurement of deformation of paper subjected to tensile loads using electronic speckle pattern interferometry
Eisaku Umezaki, Jyunnosuke Takakuwa, Katsunori Futase
Author Affiliations +
Proceedings Volume 4933, Speckle Metrology 2003; (2003) https://doi.org/10.1117/12.516668
Event: Speckle Metrology 2003, 2003, Trondheim, Norway
Abstract
This study deals with the measurement of the deformation of sheets of recycled paper subjected to tensile loads using an electronic speckle pattern interferometry (ESPI) technique. Specimens with fibers, which constitute a sheet of paper, parallel and perpendicular to the direction of paper making are used to investigate the effect of the arrangement of fibers on the tensile property. The deformation of recycled paper is compared with that of virgin pulp paper. Results reveal that a large two-dimensional deformation of recycled paper can be measured using the ESPI technique, and that the directions of fibers, which constitute a sheet of paper, have a significant effect on the two-dimensional deformation of recycled paper.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eisaku Umezaki, Jyunnosuke Takakuwa, and Katsunori Futase "Measurement of deformation of paper subjected to tensile loads using electronic speckle pattern interferometry", Proc. SPIE 4933, Speckle Metrology 2003, (27 May 2003); https://doi.org/10.1117/12.516668
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Speckle pattern

Interferometry

Manufacturing

CCD cameras

Chemical reactions

Laminated object manufacturing

Experimental mechanics

Back to Top