Paper
5 June 2003 Development and evaluation of a selenium-based flat-panel digital x-ray detector system based on quality factor
Ji Koon Park, Jang Yong Choi, Sang Sik Kang, Chi Woong Mun, Hyung-Won Lee, Sang-Hee Nam
Author Affiliations +
Abstract
Nowadays, large area, flat panel solid state detectors are being investigated for digital radiography. In this paper, development and evaluation of a selenium-based flat-panel digital x-ray detector are described. The prototype detector has a pixel pitch of 139μm and a total active imaging area of 7"× 8.5", giving a total of 1.9 million pixel. This detector include a x-ray imaging layer of amorphous selenium as a photoconductor which is evaporated in vacuum state on a TFT flat panel, to make signals in proportion to incident x-ray. The film thickness was about 500μm. To evaluate the imaging performance of the digital radiography (DR) system developed in our group, sensitivity, linearity of the response of exposure, the modulation transfer function (MTF) and detective quantum efficiency (DQE) of detector was measured. The measured sensitivity was 4.16 x 106 ehp/pixel•mR at the bias field of 10 V/μm: The beam condition was 41.9 KeV. Measured MTF at 2.5 lp/mm was 52%, and the DQE at 1.5 lp/mm was 75%. And the excellent linearity was showed where the coefficient of determination (r2) is 0.9693.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ji Koon Park, Jang Yong Choi, Sang Sik Kang, Chi Woong Mun, Hyung-Won Lee, and Sang-Hee Nam "Development and evaluation of a selenium-based flat-panel digital x-ray detector system based on quality factor", Proc. SPIE 5030, Medical Imaging 2003: Physics of Medical Imaging, (5 June 2003); https://doi.org/10.1117/12.480401
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Modulation transfer functions

X-ray detectors

Radiography

Imaging systems

X-rays

Quantum efficiency

Back to Top